[GMCnet] The perfect macerator switch for all. [message #330209] |
Wed, 21 March 2018 14:25  |
BobDunahugh
 Messages: 2465 Registered: October 2010 Location: Cedar Rapids, IA
Karma: 11
|
Senior Member |
|
|
Thanks Russell. I remember that switch. Great idea. So I went to Iowa Radio. The switch that they had was from GC Electronics. Part number35-086. Has ON- OFF- momentary ON. SPDT. Very well made, NOT from China. They also had a screw on rubber cover for that switch. As my switch is behind the license plate with all my water, and electrical hookups. Russell. Great input. Thanks again. Bob Dunahugh
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
Re: [GMCnet] The perfect macerator switch for all. [message #330213 is a reply to message #330209] |
Wed, 21 March 2018 16:55  |
 |
RF_Burns
 Messages: 2277 Registered: June 2008 Location: S. Ontario, Canada
Karma: 3
|
Senior Member |
|
|
Bob,
The GC Electronics switch 35-086 is only rated at 6 Amps @ 125VAC, so its DC rating will even be lower. Use it to power a 30-40 Amp cube relay as Ken Burton suggested. Otherwise the DC current will act like an arc welder every time you switch it off, leading to an early failure.
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC. 1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
|
|
|