| Anyone installed a Reveltronics gauge panel? [message #330163] |
Mon, 19 March 2018 14:43  |
Bill Van Vlack
Messages: 419
Registered: September 2015
Location: Guemes Island, Washington
Karma: 14
|
Senior Member |
|
|
As I was thinking about adding gauges to my coach and considering the Digi-Panel, I came across this thread:
http://gmc.mybirdfeeder.net/GMCforum/index.php?t=msg&th=37780&prevloaded=1&rid=0&start=20
that mentioned the Reveltronics panel that seems to add a lot of functionality and a reasonable price ($215 on Ebay).
and wondered if anyone here has looked at or installed one. Since I'm planning on adding EFI via the EBL (Embedded Lockers) board, it would be great if this would connect to the injector outputs to calculate mileage. This board can do data logging, which is attractive for troubleshooting, etc.
Bill Van Vlack
'76 Royale; Guemes Island, Washington; Twin bed, full (DS) side bath, Brazilian Redwood counter and settee tops,455, 6KW generator; new owner a/o mid November 2015.
|
|
|
|
|
|
| Re: Anyone installed a Reveltronics gauge panel? [message #330166 is a reply to message #330163] |
Mon, 19 March 2018 17:26  |
 |
RF_Burns
Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada
Karma: 3
|
Senior Member |
|
|
Bill,
The EBL comes with the "Whats up Display" you load on your computer. It will tell you fuel consumption, speed, injector pulse width, spark advance and way more than you could ever ask for and will data log it all.
See here: https://www.dynamicefi.com/EBL_ScreenShots.php
Its a windoze application, but some have it running on a cheap tablet... not sure of those details.
Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
