Home » Public Forums » GMCnet » Header Gasket (I need to replace my passenger side header gasket)
Re: [GMCnet] Header Gasket [message #329311 is a reply to message #329302] |
Mon, 19 February 2018 19:13 |
jimk
Messages: 6734 Registered: July 2006 Location: Belmont, CA
Karma:
|
Senior Member |
|
|
Bryon,
Never tighten the CENTER TOP bolt.
Just tighten the 4 inline ones and after 200 miles retorque it.
On Mon, Feb 19, 2018 at 2:54 PM, Bryan Hayes wrote:
> One thing that I ran into is not having the surfaces completely clean when
> installing the new gaskets. When I replaced my header gaskets the first
> time, I had some old gasket material stuck on one of the the header
> surfaces that eventually caused another leak. The second time around, I was
> in a
> hurry to replace the gaskets before hitting the road, and didn't
> completely clean the surfaces again. This, of course, led to even more
> leaks.
> Hopefully I learned my lesson the third time around. :)
> --
> Bryan Hayes
> '76 Eleganza II
> Salt Lake City, Utah
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
Goto Forum:
Current Time: Sat Sep 28 17:10:28 CDT 2024
Total time taken to generate the page: 0.01125 seconds
|