Home » Public Forums » GMCnet » Yandina combiner cycles
Re: Yandina combiner cycles [message #328344 is a reply to message #328332] |
Wed, 17 January 2018 11:18 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to previous message](/GMCforum/theme/default/images/down.png) |
Tilerpep
![United States United States](/GMCforum/images/flags/us.png) Messages: 404 Registered: June 2013 Location: Raleigh, NC
Karma:
|
Senior Member |
|
|
Thanks for the replies so far...
I posted this prompted by the thread that is talking about the Victron combiner...anyone venture a guess, or have experience, that it does the same thing with the same other components? I am leaning toward trying a Victron on the 75 across the two battery connections on the isolator.
Also, would any of you EE types know of a trick to reduce or stabilize the voltage on the 78? A diode here, a smaller or bigger wire there, type of thing?
My need for engine charge is in part due to the "collective system health is not as new" reality...! For example, on the 75 I have one air pump that runs off ignition key, and one that is on house battery. If the system didn't leak down in two days, I wouldn't have to refill the 1.5 gallon air tank each time I get going. Works best to let both air pumps run for a few minutes on shore power and then crank the 455, otherwise it ends up being idling the motor for juice.
Another example is work days...still tracking down stuff like dash lights that don't work and other issues and it's great to count on the charger to do both systems as I work when plugged into shore.
And, I typically get used batteries for the coaches...overall very good dollars to donuts ratio, but not perfect. (I found one of those big $270 yellow AGM battery for $75 last fall - that thing works GREAT!) Given three kids in college, it means used batteries and leaky air systems for a bit longer - ha! But I am functional and camp 2-5 weeks a year, so gettin' it done.
1975 Glenbrook, 1978 Royale rear bath
Raleigh, NC
|
|
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Yandina combiner cycles
By: Tilerpep on Wed, 17 January 2018 09:01
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: Yandina combiner cycles
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: Yandina combiner cycles
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: Yandina combiner cycles
By: Tomtom on Wed, 17 January 2018 10:38
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: Yandina combiner cycles
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: Yandina combiner cycles
By: Tilerpep on Wed, 17 January 2018 11:18
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: Yandina combiner cycles
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: Yandina combiner cycles
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: Yandina combiner cycles
By: Tilerpep on Wed, 17 January 2018 12:31
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: Yandina combiner cycles
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: Yandina combiner cycles
By: Tilerpep on Wed, 17 January 2018 12:55
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: Yandina combiner cycles
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] Yandina combiner cycles
By: bdub on Wed, 17 January 2018 15:10
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] Yandina combiner cycles
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: Yandina combiner cycles
By: RF_Burns on Wed, 17 January 2018 20:42
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: Yandina combiner cycles
By: midlf on Wed, 17 January 2018 20:37
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: Yandina combiner cycles
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: Yandina combiner cycles
By: JohnL455 on Fri, 19 January 2018 11:00
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: Yandina combiner cycles
By: Tilerpep on Wed, 14 March 2018 09:16
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] Yandina combiner cycles
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: Yandina combiner cycles
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: Yandina combiner cycles
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] Yandina combiner cycles
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] Yandina combiner cycles
|
Goto Forum:
Current Time: Tue Jun 18 07:28:14 CDT 2024
Total time taken to generate the page: 0.06722 seconds
|