Home » Public Forums » GMCnet » [GMCnet] bearings
Re: [GMCnet] bearings [message #328027 is a reply to message #328024] |
Mon, 08 January 2018 12:11 ![Go to previous message Go to previous message](/GMCforum/theme/default/images/up.png) ![Go to next message Go to previous message](/GMCforum/theme/default/images/down.png) |
emerystora
![United States United States](/GMCforum/images/flags/us.png) Messages: 4442 Registered: January 2004
Karma:
|
Senior Member |
|
|
Yes the zerk fitting hole can be drilled in place but the axle and bearing has to be out. Jim Kanomata has a jig available that works great. You just need a 6” long 1/8” drill bit. You also have to cut grooves in the bearing spacer with a Dremel tool.
Then tap threads into the outside hole and thread in a grease fitting.
The only problem with this is that you must first determine whether there us wear on the hub or inside if the knuckle.
You can do this with calipers but an expert like Dave Lenzi and others will do it properly which is why the recommendation to ship them off for rebuilding.
Emery Stora
77 Kingsley
Frederick, CO
> On Jan 8, 2018, at 10:13 AM, Brian Waddell wrote:
>
>
> reasonable suggestion...thanks...been told before....Brian
>
> ________________________________
> From: Gmclist on behalf of jhb1
> Sent: January 8, 2018 6:42 AM
> To: gmclist@list.gmcnet.org
> Subject: Re: [GMCnet] bearings
>
> Jack the coach up and pull the knuckles put them in a crate drive to the coming west ups place in the UPSand
> ship them to JimB or JImK and it will probably cost you less than driving to the class West I lace
>
> HTH
> --
> John H. Bell
> 77 Royale; QuadBag,Manny OneTon,Honda EV4010, FITech
> Montreal Qc.
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> Gmclist Info Page - GMCnet
> list.gmcnet.org
> To see the collection of prior postings to the list, visit the Gmclist Archives. Using Gmclist: To post a message to all the list members, send email ...
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
[GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
By: JohnL455 on Sun, 07 January 2018 17:03
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
By: Larry on Sun, 07 January 2018 17:44
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
By: bdub on Sun, 07 January 2018 18:11
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
By: jimk on Sun, 07 January 2018 18:27
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
By: USAussie on Sun, 07 January 2018 18:36
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
By: jimk on Sun, 07 January 2018 18:42
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
By: bdub on Sun, 07 January 2018 19:02
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
By: Rollerg on Mon, 08 January 2018 18:45
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
By: jimk on Sun, 07 January 2018 19:49
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
By: USAussie on Sun, 07 January 2018 18:15
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
By: USAussie on Mon, 08 January 2018 00:40
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
By: jhb1 on Mon, 08 January 2018 07:42
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
![Read Message Read Message](/GMCforum/theme/default/images/read.png) |
|
Re: [GMCnet] bearings
|
Goto Forum:
Current Time: Fri Jun 21 15:40:08 CDT 2024
Total time taken to generate the page: 0.05123 seconds
|