GMCforum: GMCnet » [GMCnet] Inner diameter Onan fuel line

Home » Public Forums » GMCnet » [GMCnet] Inner diameter Onan fuel line

Show: Today's Messages :: Polls :: Message Navigator

Re: [GMCnet] Inner diameter Onan fuel line [message #326532 is a reply to message #326522]

Thu, 30 November 2017 09:30

Matt Colie

Messages: 8547
Registered: March 2007
Location: S.E. Michigan

Karma:

Senior Member

Peer Oliver Schmidt wrote on Thu, 30 November 2017 06:05

Anyone know the inner diameter of the Onan fuel line? I want to "splice"
the connection to my heater into the Onan line, and want to have all the
pieces in place before cutting things.

Thanks.
--
Best regards

Peer Oliver Schmidt
PGP Key ID: 0x83E1C2EA

'76a Eleganza II 26', VA
'73 Sequoia 23', Germany, SH

Peer,

When I replaced all of mine both metal and rubber, all of it was 1/4" nominal. So, the metal was 1/4 OD and the rubber 1/4 ID.
I hope this helps.

Matt

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

[Message index]

		[GMCnet] Inner diameter Onan fuel line By: Olly Schmidt on Thu, 30 November 2017 05:05
		Re: [GMCnet] Inner diameter Onan fuel line By: Matt Colie on Thu, 30 November 2017 09:30
		Re: [GMCnet] Inner diameter Onan fuel line By: Olly Schmidt on Thu, 30 November 2017 09:35
		Re: [GMCnet] Inner diameter Onan fuel line By: Thomas Pryor on Thu, 30 November 2017 09:49

Previous Topic:	Re: [GMCnet] EFI vs Carb.
Next Topic:	[GMCnet] PS Pump Leaks

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Jun 26 02:56:25 CDT 2024

Total time taken to generate the page: 0.00895 seconds