GMCforum: GMCnet » [GMCnet] Work platform

Home » Public Forums » GMCnet » [GMCnet] Work platform

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Work platform [message #326052]

Wed, 15 November 2017 20:46

glwgmc

Messages: 1014
Registered: June 2004

Karma: 10

Senior Member

Ok, I know no one on this forum needs a 300 pound work platform……but, at less than $30 (down from $70) this is hard to pass up for a lot of GMC stuff. It is 20” high and 4’ long which will get you safely up where you need to be for a lot of what you need to do on your GMC. folds really flat for easy storage. I just purchased one for use with our Prevost where reaching the windshields for washing is a bit of a chore from the ground. With this extra 20” it is a snap. Way better than standing on the front bumper of your GMC like I used to do……. On sale at Home Depot right now:

https://www.homedepot.com/b/Building-Materials-Ladders-Work-Platforms/Gorilla-Ladders/N-5yc1vZcbp1Zno

Jerry
Jerry Work
The Dovetail Joint
Fine furniture designed and hand crafted in the 1907 former Masonic Temple building in historic Kerby, OR

glwork@mac.com
http://jerrywork.com

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Jerry & Sharon Work
78 Royale
Kerby, OR

Report message to a moderator

Re: [GMCnet] Work platform [message #326090 is a reply to message #326052]

Thu, 16 November 2017 20:12

Dave Stragand

Messages: 307
Registered: October 2017

Karma: 0

Senior Member

Thanks, Jerry. Great idea. I just went and checked them out and bought one.

> On Nov 15, 2017, at 9:47 PM, Gerald Work wrote:
>
> Ok, I know no one on this forum needs a 300 pound work platform……but, at less than $30 (down from $70) this is hard to pass up for a lot of GMC stuff. It is 20” high and 4’ long which will get you safely up where you need to be for a lot of what you need to do on your GMC. folds really flat for easy storage. I just purchased one for use with our Prevost where reaching the windshields for washing is a bit of a chore from the ground. With this extra 20” it is a snap. Way better than standing on the front bumper of your GMC like I used to do……. On sale at Home Depot right now:
>
> https://www.homedepot.com/b/Building-Materials-Ladders-Work-Platforms/Gorilla-Ladders/N-5yc1vZcbp1Zno
>
> Jerry
> Jerry Work
> The Dovetail Joint
> Fine furniture designed and hand crafted in the 1907 former Masonic Temple building in historic Kerby, OR
>
> glwork@mac.com
> http://jerrywork.com
>
>
>
>
>
>
>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

1978 Transmode (403) Pittsburgh, PA

Report message to a moderator

Re: [GMCnet] Work platform [message #326091 is a reply to message #326090]

Thu, 16 November 2017 20:25

Ken Henderson

Messages: 8726
Registered: March 2004
Location: Americus, GA

Karma: 9

Senior Member

Me too. I've ordered one for pickup at the nearest Home Depot, 32 miles
away, when I get down that way.

Ken H.

On Thu, Nov 16, 2017 at 9:12 PM, Dave Stragand <
dave.stragand@forwardlook.net> wrote:

> Thanks, Jerry. Great idea. I just went and checked them out and bought
> one.
>
>> On Nov 15, 2017, at 9:47 PM, Gerald Work wrote:
>>
>> Ok, I know no one on this forum needs a 300 pound work platform……but, at
> less than $30 (down from $70) this is hard to pass up for a lot of GMC
> stuff.
>
...
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach

Report message to a moderator

Re: [GMCnet] Work platform [message #326092 is a reply to message #326091]

Thu, 16 November 2017 20:31

k2gkk

Messages: 4452
Registered: November 2009

Karma: -8

Senior Member

Rob?

>> On Nov 15, 2017, at 9:47 PM, Gerald Work wrote:
>>
>> Ok, I know no one on this forum needs a 300 pound work platform……but, at
> less than $30 (down from $70) this is hard to pass up for a lot of GMC
> stuff.

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Re: [GMCnet] Work platform [message #326094 is a reply to message #326092]

Thu, 16 November 2017 20:49

USAussie

Messages: 15912
Registered: July 2007
Location: Sydney, Australia

Karma: 6

Senior Member

Mac,

If I'm the "Rob?" I've been busy helping John with arrangements for Beth and haven't had time to go look at this, maybe on Sunday.

Regards,
Rob M.
The Pedantic Mechanic
Sydney, Australia
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
USA '77 Kingsley - TZE 267V100808

-----Original Message-----
From: Gmclist [mailto:gmclist-bounces@list.gmcnet.org] On Behalf Of D C _Mac_ Macdonald
Sent: Thursday, November 16, 2017 8:31 PM
To: GMC Mail List
Subject: Re: [GMCnet] Work platform

Rob?

>> On Nov 15, 2017, at 9:47 PM, Gerald Work wrote:
>>
>> Ok, I know no one on this forum needs a 300 pound work platform……but, at
> less than $30 (down from $70) this is hard to pass up for a lot of GMC
> stuff.

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Regards, Rob M. (USAussie) The Pedantic Mechanic Sydney, Australia '75 Avion - AUS - The Blue Streak TZE365V100428 '75 Avion - USA - Double Trouble TZE365V100426

Report message to a moderator

Previous Topic:	trip report
Next Topic:	Electrical gremlins

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Mar 10 11:29:48 CDT 2025

Total time taken to generate the page: 0.01006 seconds