| [GMCnet] Onan running rough update [message #321636] |
Fri, 04 August 2017 19:40  |
ron preston
Messages: 46
Registered: November 2016
Karma:
|
Member |
|
|
Many thanks to Jim Miller and Jim Hupy for their help and suggestions my
6000 W onan had been running rough so I decided to rebuild the carburetor
in doing so forgot to put the inner gasket on the float bowl retainer
leading to days of confusion but finally figured that out . Jim Miller
suggested burnishing the points that was probably the problem originally.
Now I decided to install pertronix ignition and the new points so I now
have two ignition systems both functioning well ...so far. My problem now
is that it won't start unless I jump power straight to the positive side of
the coil at which time I hear the fuel pump working it it then starts
and runs fine i disconnect the jumper from the battery immediately upon
starting. Already installed a new board. Looking for any suggestions.
Thanks a lot,
Ron Preston
75 Glenbrook
San jose
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
