|
|
| Re: [GMCnet] Saving the outside rear body panel around the rear wheels. ( Not talking about the inter. That's next. ) [message #321248 is a reply to message #321241] |
Sat, 29 July 2017 14:57  |
BobDunahugh
Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA
Karma: 11
|
Senior Member |
|
|
Figured it out. Got the left panel off with no damage. Drilled the pop rivets out at the bottom. Wormed the panel with my propane torch to the point that it was too hot to touch. But not burn the paint. Started at the edge with a stiff putty knife. Then moved slowly to the rear. Warming/lifting as I went. Might as well pull the right side off now
Bob Dunahugh
________________________________
From: Bob Dunahugh
Sent: Saturday, July 29, 2017 10:32 AM
To: gmclist@list.gmcnet.org
Subject: Saving the outside rear body panel around the rear wheels. ( Not talking about the inter. That's next. )
Blow out a rear tire. And this panel is what gets destroyed. The ones on our 78 GMC convertible are both great. Looks fairly simple to remove. Anyone ever removed the entire panel?
Bob Dunahugh 78 Royale
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
