| Top End Work Question - Native guide needed [message #321080] |
Tue, 25 July 2017 15:11  |
 |
Matt Colie
Messages: 8547
Registered: March 2007
Location: S.E. Michigan
Karma:
|
Senior Member |
|
|
I would appreciate have a native guide's experience here.
Blackstone has told me that I have coolant in my engine's lube oil.
This is most likely to be and intake or head gasket leak. (That is based on my experience. And I'm hoping).
I have planned to take the top off the engine after Elkhart.
Question for those with more experience doing engine work in the coach.
Is this best done while leaving the block (455) in place,
Or is it worthwhile to haul the whole engine out and put it on a stand??
If I take the engine out, it has to come out the top, it is a 23 and I have a good hoist.
Thank you all.
Matt
Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
