Re: Couple more newbie questions [message #320858 is a reply to message #320835] |
Sat, 22 July 2017 20:30 |
Ken Burton
Messages: 10030 Registered: January 2004 Location: Hebron, Indiana
Karma:
|
Senior Member |
|
|
If you can get to the hole with the tank in the coach, there is slways plastic welding. I have had 2 black ranks and one plastic gas tan out of a Blazer plastic welded. It cost me $25.00 for each one of them. None of them have ever leaked again. The Blazer one had a gash in it about 4inches long from a piece of steel that my daughter ran over. Again it was a 5 minute job on the vehicle to fix it.
The screw idea also works. I put a screw in a big air compressor steel tank about 5 years ago. It has not leaked since then and it normally holds about 140 PSI.
Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana
|
|
|