| Front ride height adjustment bolt turns/In [message #320761] |
Fri, 21 July 2017 09:16  |
Larry
Messages: 2875
Registered: January 2004
Location: Menomonie, WI
Karma: 10
|
Senior Member |
|
|
I need to adjust my front ride height up about 1" from the existing 12 1/8" to the speck'd 13 1/8". How many turns on the adjustment bolt for the pork chop, is equal to 1"?
Thanks
Larry 
78 Royale w/500 Caddy
Menomonie, WI.
|
|
|
|
| Re: Front ride height adjustment bolt turns/In [message #320763 is a reply to message #320761] |
Fri, 21 July 2017 09:55  |
Scott Nutter
Messages: 782
Registered: January 2015
Location: Houston/San Diego
Karma: 4
|
Senior Member |
|
|
Seems like "6" turns works.
Scott Nutter
1978 Royale Center Kitchen, Patterson 455, switch pitch tranny, 3.21 final drive, Quad bags, Dave Lenzi super duty mid axle disc brakes, tankless water heater, everything Lenzi. Alex Ferrera installed MSD Atomic EFI
Houston, Texas
|
|
|
|
|
|
| Re: [GMCnet] Front ride height adjustment bolt turns/In [message #320765 is a reply to message #320764] |
Fri, 21 July 2017 09:55 |
James Hupy
Messages: 6806
Registered: May 2010
Karma: -62
|
Senior Member |
|
|
Larry, if you wind up needing new torsion bars, contact me. I have 5 sets.
Jim Hupy
Salem, Or.
On Jul 21, 2017 7:51 AM, "Gary Kosier" wrote:
> Larry,
>
> Approximately six.
>
> Gary Kosier
> 77PB w/500Cad
> Newark, Ohio
>
> --------------------------------------------------
> From: "Larry"
> Sent: Friday, July 21, 2017 10:16 AM
> To:
> Subject: [GMCnet] Front ride height adjustment bolt turns/In
>
> I need to adjust my front ride height up about 1" from the existing 12
>> 1/8" to the speck'd 13 1/8". How many turns on the adjustment bolt for the
>> pork
>> chop, is equal to 1"?
>> Thanks
>> --
>> Larry
>> 78 Royale w/500 Caddy
>> Menomonie, WI.
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] Front ride height adjustment bolt turns/In [message #320767 is a reply to message #320765] |
Fri, 21 July 2017 10:26 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Be sure and use an Unloader tool, else you'll strip the bolt/square nut.
On Fri, Jul 21, 2017 at 7:55 AM, James Hupy wrote:
> Larry, if you wind up needing new torsion bars, contact me. I have 5 sets.
> Jim Hupy
> Salem, Or.
>
> On Jul 21, 2017 7:51 AM, "Gary Kosier" wrote:
>
>> Larry,
>>
>> Approximately six.
>>
>> Gary Kosier
>> 77PB w/500Cad
>> Newark, Ohio
>>
>> --------------------------------------------------
>> From: "Larry"
>> Sent: Friday, July 21, 2017 10:16 AM
>> To:
>> Subject: [GMCnet] Front ride height adjustment bolt turns/In
>>
>> I need to adjust my front ride height up about 1" from the existing 12
>>> 1/8" to the speck'd 13 1/8". How many turns on the adjustment bolt for
> the
>>> pork
>>> chop, is equal to 1"?
>>> Thanks
>>> --
>>> Larry
>>> 78 Royale w/500 Caddy
>>> Menomonie, WI.
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>>
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
|
|
| Re: [GMCnet] Front ride height adjustment bolt turns/In [message #320808 is a reply to message #320778] |
Fri, 21 July 2017 18:41 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Larry,
Seldom do we see the height the same on both sides. I learned from Jim
Bounds many years ago a method I call the " TriCycle " method of leveling
the coach.
If interested, call me and I will explain it.
On Fri, Jul 21, 2017 at 9:45 AM, Larry wrote:
> Thanks all. I thought it was about 6 to the inch, but wanted a confirm.
> Will be using a Unloader tool for sure, and thanks Jim. If I need bars,
> you'll be the first I call.
> --
> Larry
> 78 Royale w/500 Caddy
> Menomonie, WI.
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
