GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » cabinet
cabinet [message #320340] Wed, 12 July 2017 14:23 Go to next message
jhbridges is currently offline  jhbridges   United States
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
Senior Member
Befoe I risk fingers learning cabinet repair, anybody got the one that fits over the dinette in an EL II? Runs from the door forward to the passenger seat. Mine had a TV suspended from it which tore out the spit board back. I will replace it with plywood if I can't find one.

--johnny


Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell
Re: [GMCnet] cabinet [message #320341 is a reply to message #320340] Wed, 12 July 2017 15:18 Go to previous messageGo to next message
Nelson is currently offline  Nelson   United States
Messages: 120
Registered: August 2014
Karma: 0
Senior Member
Johnny,
I don't have a replacement cabinet, but I can probably repair the one that is damaged if you bring it with you to the get together in Orlando this fall.

Sent from my iPhone
Nelson Wright
78 Royal rear bath
Orlando Fl.

> On Jul 12, 2017, at 3:23 PM, Johnny Bridges via Gmclist wrote:
>
> Befoe I risk fingers learning cabinet repair, anybody got the one that fits over the dinette in an EL II? Runs from the door forward to the passenger
> seat. Mine had a TV suspended from it which tore out the spit board back. I will replace it with plywood if I can't find one.
>
> --johnny
> --
> 76 26' Eleganza(?) with beaucoup mods and add - ons.
> Braselton, Ga.
> "I forgive them all, save those who hurt the dogs. They must answer to me in hell" - ol Andy, paraphrased
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Re: cabinet [message #320355 is a reply to message #320340] Thu, 13 July 2017 07:49 Go to previous message
jhbridges is currently offline  jhbridges   United States
Messages: 8412
Registered: May 2011
Location: Braselton ga
Karma: -74
Senior Member
Thansks, Nelson. I should be done by then though. It needs only a single piece cut and glued in the back which I can handle if I have to.

--johnny


Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell
Previous Topic: 78 Electro ll leveling valves
Next Topic: Pertronics and Onan8h
Goto Forum:
  


Current Time: Fri Sep 20 03:56:53 CDT 2024

Total time taken to generate the page: 0.12685 seconds