| [GMCnet] NEED: intake for '77 403 [message #320258] |
Mon, 10 July 2017 11:51  |
 |
mark grady
Messages: 70
Registered: November 2015
Location: northern Indiana
Karma: 0
|
Member |
|
|
I'll do a post here and to the Facebook groups. I need an intake for a '77
403 (Magnafluxing shows the old one is cracked pretty bad.) Prefer low
profile so as not to build a dog house. The rest of the engine is good, and
I have the Springfield crossover block off plates for the replacement.
Reply here, or call me on 1-844-329-2978. The number is robo-screened, so
you have to answer a simple question. You can also e-mail to mgrady at
amish bell dot com (put it all together.) Thanks in advance.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
'77 + 78 Kingsley
|
|
|
|
|
|
| Re: [GMCnet] NEED: intake for '77 403 [message #320260 is a reply to message #320258] |
Mon, 10 July 2017 12:04  |
James Hupy
Messages: 6806
Registered: May 2010
Karma: -62
|
Senior Member |
|
|
On the 403 with good body mounts and pads, an Edelbrock performer intake
manifold with a quadrajet and stock air cleaner will clear the hatch. If
you cannot locate a stock 403 manifold, this is an option for you. But,
there should be some 403 manifolds out there. Good luck.
Jim Hupy
Salem, Or
78 GMC ROYALE 403
On Jul 10, 2017 9:52 AM, "mark grady" wrote:
> I'll do a post here and to the Facebook groups. I need an intake for a '77
> 403 (Magnafluxing shows the old one is cracked pretty bad.) Prefer low
> profile so as not to build a dog house. The rest of the engine is good, and
> I have the Springfield crossover block off plates for the replacement.
>
> Reply here, or call me on 1-844-329-2978. The number is robo-screened, so
> you have to answer a simple question. You can also e-mail to mgrady at
> amish bell dot com (put it all together.) Thanks in advance.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] NEED: intake for '77 403 [message #320272 is a reply to message #320258] |
Mon, 10 July 2017 18:00 |
 |
USAussie
Messages: 15912
Registered: July 2007
Location: Sydney, Australia
Karma: 6
|
Senior Member |
|
|
Mark,
If you block the crossovers with one of Springfield Ignitions (Dick Paterson) kits:
http://www.springfield-ignition.com/gmc-motorhome/block-off-kits/
The temperature in the lifter valley will be around 173?F:
http://www.gmcmhphotos.com/photos/aa-miscellaneous-photos/p63426-intake-manifold-internal-temp.html
You may be able to repair the crack on the lower side that faces the lifter valley and bottom of the plenum under the carb.
Regards,
Rob M.
Sydney, Australia
AUS '75 Avion - The Blue Streak TZE365V100428
USA '75 Avion - Double Trouble TZE365V100426
USA '77 Kingsley - TZE 267V100808
-----Original Message-----
From: Gmclist [mailto:gmclist-bounces@list.gmcnet.org] On Behalf Of mark grady
Sent: Tuesday, July 11, 2017 2:52 AM
To: gmclist@list.gmcnet.org
Subject: [GMCnet] NEED: intake for '77 403
I'll do a post here and to the Facebook groups. I need an intake for a '77
403 (Magnafluxing shows the old one is cracked pretty bad.) Prefer low
profile so as not to build a dog house. The rest of the engine is good, and
I have the Springfield crossover block off plates for the replacement.
Reply here, or call me on 1-844-329-2978. The number is robo-screened, so
you have to answer a simple question. You can also e-mail to mgrady at
amish bell dot com (put it all together.) Thanks in advance.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Regards,
Rob M. (USAussie)
The Pedantic Mechanic
Sydney, Australia
'75 Avion - AUS - The Blue Streak TZE365V100428
'75 Avion - USA - Double Trouble TZE365V100426
|
|
|
|
| Re: [GMCnet] NEED: intake for '77 403 [message #320277 is a reply to message #320259] |
Mon, 10 July 2017 21:24 |
|
mark grady
Messages: 70
Registered: November 2015
Location: northern Indiana
Karma: 0
|
Member |
|
|
Thanks for everyone's reply. I did make an error in the phone number, the
correct one is 844-329-2973.
For work, we provide specialized telephone network services for various
customers. One of the platforms provides verification before processing
calls. Maybe not tonight, but you can try it in the morning.
You have to have basic GMC knowledge to pass the test and complete the call.
I have a solid lead from one source, with $50 shipping. I have another lead
closer to home that I can drive to. I'll see what else comes in and then
get moving. I wouldn't have guessed it was cracked as bad as it is.
Mark
On Mon, Jul 10, 2017 at 1:08 PM, Nelson Wright wrote:
> Mark,
> I can't help you with the manifold but I would like to know more about
> Robo screening as I am sure many others would be interested :-)
>
>
> Sent from my iPhone
> Nelson Wright
>
> Orlando Fl.
>
>> On Jul 10, 2017, at 12:51 PM, mark grady wrote:
>>
>> I'll do a post here and to the Facebook groups. I need an intake for a
> '77
>> 403 (Magnafluxing shows the old one is cracked pretty bad.) Prefer low
>> profile so as not to build a dog house. The rest of the engine is good,
> and
>> I have the Springfield crossover block off plates for the replacement.
>>
>> Reply here, or call me on 1-844-329-2978. The number is robo-screened,
> so
>> you have to answer a simple question. You can also e-mail to mgrady at
>> amish bell dot com (put it all together.) Thanks in advance.
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
'77 + 78 Kingsley
|
|
|
|
| Re: [GMCnet] NEED: intake for '77 403 [message #320283 is a reply to message #320272] |
Tue, 11 July 2017 00:17 |
Bob de Kruyff
Messages: 4260
Registered: January 2004
Location: Chandler, AZ
Karma: 1
|
Senior Member |
|
|
I'm pretty sure any manifold from later 403's used well into the 80's will fit. They are aluminum and will have an EGR to block off. The 403 didn't have a low manifold like the 455 Toronados do--it's not needed. Look at full size GM cars like 98's and 88's and you will find one.
Bob de Kruyff
78 Eleganza
Chandler, AZ
|
|
|
|
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
