GMCforum: GMCnet » jc4 vacuum pump wiring

Home » Public Forums » GMCnet » jc4 vacuum pump wiring

Show: Today's Messages :: Polls :: Message Navigator

jc4 vacuum pump wiring [message #319886]

Sun, 02 July 2017 09:51

lqqkatjon

Messages: 2324
Registered: October 2010
Location: St. Cloud, MN

Karma:

Senior Member

Ok,

just wanting a little clarification:

NC = no connection????

I see in the power point, there are 3 wires off the molex connection, however, it is circled "4 wires used".

the diagrams show 4 items:

12+
NC
ACC
GND.

the NC in the pin out diagram says it is a ground on the pump.

I only have 3 pins that came with the connector.

Jon Roche 75 palm beach EBL EFI, manny headers, Micro Level, rebuilt most of coach now. St. Cloud, MN http://lqqkatjon.blogspot.com/

Report message to a moderator

[Message index]

		jc4 vacuum pump wiring By: lqqkatjon on Sun, 02 July 2017 09:51
		Re: [GMCnet] jc4 vacuum pump wiring By: emerystora on Sun, 02 July 2017 11:31
		Re: [GMCnet] jc4 vacuum pump wiring By: Ken Henderson on Sun, 02 July 2017 11:58
		Re: jc4 vacuum pump wiring By: lqqkatjon on Sun, 02 July 2017 17:38
		Re: jc4 vacuum pump wiring By: Matt Colie on Sun, 02 July 2017 18:55
		Re: [GMCnet] jc4 vacuum pump wiring By: Ken Henderson on Sun, 02 July 2017 18:58

Previous Topic:	Transmission modulator
Next Topic:	[GMCnet] New Onan not working right

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Nov 15 06:48:11 CST 2024

Total time taken to generate the page: 0.03377 seconds