Home » Public Forums » GMCnet » Glove Box Latch
| Glove Box Latch [message #319562] |
Sun, 25 June 2017 19:52  |
Justin Brady
Messages: 769
Registered: April 2015
Location: Bell Buckle, TN
Karma: 11
|
Senior Member |
|
|
Anybody have an inner glove box latch they are willing to part with?
Or know another vehicle that has the same mechanism?
This is basically the last piece of the puzzle
Justin Brady
http://www.thegmcrv.com/
1976 Palm Beach 455
|
|
|
|
| Re: Glove Box Latch [message #319565 is a reply to message #319562] |
Sun, 25 June 2017 20:05  |
C Boyd
Messages: 2629
Registered: April 2006
Karma: 18
|
Senior Member |
|
|
Sir: I should have, can let you know tomorrow. Pm me an address and I'll drop it in an envelope. Any stuff else?
SONICJK wrote on Sun, 25 June 2017 20:52Anybody have an inner glove box latch they are willing to part with?
Or know another vehicle that has the same mechanism?
This is basically the last piece of the puzzle
C. Boyd
76 Crestmont
East Tennessee
|
|
|
|
| Re: [GMCnet] Glove Box Latch [message #319571 is a reply to message #319565] |
Mon, 26 June 2017 05:48 |
Bruce Hart
Messages: 1501
Registered: October 2011
Location: La Grange, Wyoming
Karma: 5
|
Senior Member |
|
|
Charles, would you happen to have a internal wiper arm assembly. My
passenger side arm broke off from a wet heavy snow fall.
On Sun, Jun 25, 2017 at 7:05 PM, Charles Boyd
wrote:
> Sir: I should have, can let you know tomorrow. Pm me an address and I'll
> drop it in an envelope. Any stuff else?
>
>
>
>
>
>
> SONICJK wrote on Sun, 25 June 2017 20:52
>> Anybody have an inner glove box latch they are willing to part with?
>>
>> Or know another vehicle that has the same mechanism?
>>
>> This is basically the last piece of the puzzle
>
>
> --
> C. Boyd
> 76 Crestmont
> East Tennessee
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
|
|
|
|
| Re: [GMCnet] Glove Box Latch [message #319572 is a reply to message #319571] |
Mon, 26 June 2017 05:55 |
C Boyd
Messages: 2629
Registered: April 2006
Karma: 18
|
Senior Member |
|
|
Sir: I should have. I'll look and check it out.
Bruce Hart wrote on Mon, 26 June 2017 06:48Charles, would you happen to have a internal wiper arm assembly. My
passenger side arm broke off from a wet heavy snow fall.
On Sun, Jun 25, 2017 at 7:05 PM, Charles Boyd
wrote:
> Sir: I should have, can let you know tomorrow. Pm me an address and I'll
> drop it in an envelope. Any stuff else?
>
>
>
>
>
>
> SONICJK wrote on Sun, 25 June 2017 20:52
>> Anybody have an inner glove box latch they are willing to part with?
>>
>> Or know another vehicle that has the same mechanism?
>>
>> This is basically the last piece of the puzzle
>
>
> --
> C. Boyd
> 76 Crestmont
> East Tennessee
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
C. Boyd
76 Crestmont
East Tennessee
|
|
|
|
| Re: [GMCnet] Glove Box Latch [message #319573 is a reply to message #319572] |
Mon, 26 June 2017 05:59 |
Bruce Hart
Messages: 1501
Registered: October 2011
Location: La Grange, Wyoming
Karma: 5
|
Senior Member |
|
|
Great!
On Mon, Jun 26, 2017 at 4:55 AM, Charles Boyd
wrote:
> Sir: I should have. I'll look and check it out.
>
>
>
> Bruce Hart wrote on Mon, 26 June 2017 06:48
>> Charles, would you happen to have a internal wiper arm assembly. My
>> passenger side arm broke off from a wet heavy snow fall.
>>
>> On Sun, Jun 25, 2017 at 7:05 PM, Charles Boyd
>> wrote:
>>
>>> Sir: I should have, can let you know tomorrow. Pm me an address and
> I'll
>>> drop it in an envelope. Any stuff else?
>>>
>>>
>>>
>>>
>>>
>>>
>>> SONICJK wrote on Sun, 25 June 2017 20:52
>>>> Anybody have an inner glove box latch they are willing to part with?
>>>>
>>>> Or know another vehicle that has the same mechanism?
>>>>
>>>> This is basically the last piece of the puzzle
>>>
>>>
>>> --
>>> C. Boyd
>>> 76 Crestmont
>>> East Tennessee
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>>
>>
>>
>> --
>> Bruce Hart
>> 1976 Palm Beach
>> Milliken, Co
>> GMC=Got More Class
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> --
> C. Boyd
> 76 Crestmont
> East Tennessee
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
|
|
|
|
| Re: [GMCnet] Glove Box Latch [message #319601 is a reply to message #319573] |
Mon, 26 June 2017 10:20 |
C Boyd
Messages: 2629
Registered: April 2006
Karma: 18
|
Senior Member |
|
|
Justin: latch catch in hand will send in tomorrow's mail.
Bruce: passenger side only in hand. Is your address in International registry ? Can send tomorrow also.
C. Boyd
76 Crestmont
East Tennessee
|
|
|
|
| Re: [GMCnet] Glove Box Latch [message #319638 is a reply to message #319601] |
Mon, 26 June 2017 20:38 |
Bruce Hart
Messages: 1501
Registered: October 2011
Location: La Grange, Wyoming
Karma: 5
|
Senior Member |
|
|
Charles, that would be great
Bruce hart
2182 Birdie Dr.
Milliken, Co 80543
Are you in need of anything for your coach? I do have a few left over
parts from a 1973 Canyonland! I have an assortment of engine brackets,
toll window catch, speed o- cable wiper cable, homemade grease zerks for
the bogies, alternator tension device, stainless steal washers for wiper
blade modification.
Let me know how much with shipping?
On Mon, Jun 26, 2017 at 9:20 AM, Charles Boyd
wrote:
> Justin: latch catch in hand will send in tomorrow's mail.
>
> Bruce: passenger side only in hand. Is your address in International
> registry ? Can send tomorrow also.
> --
> C. Boyd
> 76 Crestmont
> East Tennessee
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
|
|
|
|
| Re: [GMCnet] Glove Box Latch [message #319639 is a reply to message #319638] |
Mon, 26 June 2017 20:55 |
C Boyd
Messages: 2629
Registered: April 2006
Karma: 18
|
Senior Member |
|
|
I could use the grease zerks. Are they different from a 76? I thought a 73 was a single hole pin? Even trade?
Bruce Hart wrote on Mon, 26 June 2017 21:38Charles, that would be great
Bruce hart
2182 Birdie Dr.
Milliken, Co 80543
Are you in need of anything for your coach? I do have a few left over
parts from a 1973 Canyonland! I have an assortment of engine brackets,
toll window catch, speed o- cable wiper cable, homemade grease zerks for
the bogies, alternator tension device, stainless steal washers for wiper
blade modification.
Let me know how much with shipping?
On Mon, Jun 26, 2017 at 9:20 AM, Charles Boyd
wrote:
> Justin: latch catch in hand will send in tomorrow's mail.
>
> Bruce: passenger side only in hand. Is your address in International
> registry ? Can send tomorrow also.
> --
> C. Boyd
> 76 Crestmont
> East Tennessee
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
C. Boyd
76 Crestmont
East Tennessee
|
|
|
|
| Re: [GMCnet] Glove Box Latch [message #319643 is a reply to message #319639] |
Tue, 27 June 2017 02:59 |
Bruce Hart
Messages: 1501
Registered: October 2011
Location: La Grange, Wyoming
Karma: 5
|
Senior Member |
|
|
These are modified to grease to back hole of the pin for the 76.
http://www.gmcmhphotos.com/photos/bogie-greaser-mod-3/p6896.html
You would remove the single grease zerk, remove old grease in pin with a
straw, and insert new double grease zerks.
On Mon, Jun 26, 2017 at 7:55 PM, Charles Boyd
wrote:
> I could use the grease zerks. Are they different from a 76? I thought a
> 73 was a single hole pin? Even trade?
>
> Bruce Hart wrote on Mon, 26 June 2017 21:38
>> Charles, that would be great
>> Bruce hart
>> 2182 Birdie Dr.
>> Milliken, Co 80543
>>
>>
>> Are you in need of anything for your coach? I do have a few left over
>> parts from a 1973 Canyonland! I have an assortment of engine brackets,
>> toll window catch, speed o- cable wiper cable, homemade grease zerks for
>> the bogies, alternator tension device, stainless steal washers for wiper
>> blade modification.
>> Let me know how much with shipping?
>>
>> On Mon, Jun 26, 2017 at 9:20 AM, Charles Boyd
>> wrote:
>>
>>> Justin: latch catch in hand will send in tomorrow's mail.
>>>
>>> Bruce: passenger side only in hand. Is your address in International
>>> registry ? Can send tomorrow also.
>>> --
>>> C. Boyd
>>> 76 Crestmont
>>> East Tennessee
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>>
>>
>>
>> --
>> Bruce Hart
>> 1976 Palm Beach
>> Milliken, Co
>> GMC=Got More Class
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> --
> C. Boyd
> 76 Crestmont
> East Tennessee
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
|
|
|
|
| Re: [GMCnet] Glove Box Latch [message #319644 is a reply to message #319643] |
Tue, 27 June 2017 05:44 |
C Boyd
Messages: 2629
Registered: April 2006
Karma: 18
|
Senior Member |
|
|
I have installed some for other owners. I don't have a set for our new 76 Eleganza staff car. Did you get the pm I sent you with FedEx tracking #?
Bruce Hart wrote on Tue, 27 June 2017 03:59These are modified to grease to back hole of the pin for the 76.
http://www.gmcmhphotos.com/photos/bogie-greaser-mod-3/p6896.html
You would remove the single grease zerk, remove old grease in pin with a
straw, and insert new double grease zerks.
On Mon, Jun 26, 2017 at 7:55 PM, Charles Boyd
wrote:
> I could use the grease zerks. Are they different from a 76? I thought a
> 73 was a single hole pin? Even trade?
>
> Bruce Hart wrote on Mon, 26 June 2017 21:38
>> Charles, that would be great
>> Bruce hart
>> 2182 Birdie Dr.
>> Milliken, Co 80543
>>
>>
>> Are you in need of anything for your coach? I do have a few left over
>> parts from a 1973 Canyonland! I have an assortment of engine brackets,
>> toll window catch, speed o- cable wiper cable, homemade grease zerks for
>> the bogies, alternator tension device, stainless steal washers for wiper
>> blade modification.
>> Let me know how much with shipping?
>>
>> On Mon, Jun 26, 2017 at 9:20 AM, Charles Boyd
>> wrote:
>>
>>> Justin: latch catch in hand will send in tomorrow's mail.
>>>
>>> Bruce: passenger side only in hand. Is your address in International
>>> registry ? Can send tomorrow also.
>>> --
>>> C. Boyd
>>> 76 Crestmont
>>> East Tennessee
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>>
>>
>>
>> --
>> Bruce Hart
>> 1976 Palm Beach
>> Milliken, Co
>> GMC=Got More Class
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> --
> C. Boyd
> 76 Crestmont
> East Tennessee
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
C. Boyd
76 Crestmont
East Tennessee
|
|
|
|
| Re: [GMCnet] Glove Box Latch [message #319645 is a reply to message #319644] |
Tue, 27 June 2017 05:52 |
Bruce Hart
Messages: 1501
Registered: October 2011
Location: La Grange, Wyoming
Karma: 5
|
Senior Member |
|
|
Got it. Replied to PM
On Tue, Jun 27, 2017 at 4:44 AM, Charles Boyd
wrote:
> I have installed some for other owners. I don't have a set for our new 76
> Eleganza staff car. Did you get the pm I sent you with FedEx tracking #?
>
>
>
> Bruce Hart wrote on Tue, 27 June 2017 03:59
>> These are modified to grease to back hole of the pin for the 76.
>>
>> http://www.gmcmhphotos.com/photos/bogie-greaser-mod-3/p6896.html
>>
>> You would remove the single grease zerk, remove old grease in pin with a
>> straw, and insert new double grease zerks.
>>
>> On Mon, Jun 26, 2017 at 7:55 PM, Charles Boyd
>> wrote:
>>
>>> I could use the grease zerks. Are they different from a 76? I
> thought a
>>> 73 was a single hole pin? Even trade?
>>>
>>> Bruce Hart wrote on Mon, 26 June 2017 21:38
>>>> Charles, that would be great
>>>> Bruce hart
>>>> 2182 Birdie Dr.
>>>> Milliken, Co 80543
>>>>
>>>>
>>>> Are you in need of anything for your coach? I do have a few left
> over
>>>> parts from a 1973 Canyonland! I have an assortment of engine
> brackets,
>>>> toll window catch, speed o- cable wiper cable, homemade grease zerks
> for
>>>> the bogies, alternator tension device, stainless steal washers for
> wiper
>>>> blade modification.
>>>> Let me know how much with shipping?
>>>>
>>>> On Mon, Jun 26, 2017 at 9:20 AM, Charles Boyd
>>>> wrote:
>>>>
>>>> > Justin: latch catch in hand will send in tomorrow's mail.
>>>> >
>>>> > Bruce: passenger side only in hand. Is your address in
> International
>>>> > registry ? Can send tomorrow also.
>>>> > --
>>>> > C. Boyd
>>>> > 76 Crestmont
>>>> > East Tennessee
>>>> >
>>>> > _______________________________________________
>>>> > GMCnet mailing list
>>>> > Unsubscribe or Change List Options:
>>>> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>> >
>>>>
>>>>
>>>>
>>>> --
>>>> Bruce Hart
>>>> 1976 Palm Beach
>>>> Milliken, Co
>>>> GMC=Got More Class
>>>> _______________________________________________
>>>> GMCnet mailing list
>>>> Unsubscribe or Change List Options:
>>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>>>
>>> --
>>> C. Boyd
>>> 76 Crestmont
>>> East Tennessee
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>>
>>
>>
>> --
>> Bruce Hart
>> 1976 Palm Beach
>> Milliken, Co
>> GMC=Got More Class
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> --
> C. Boyd
> 76 Crestmont
> East Tennessee
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
|
|
|
|
| Re: [GMCnet] Glove Box Latch [message #319657 is a reply to message #319639] |
Tue, 27 June 2017 10:13 |
A Hamilto
Messages: 4508
Registered: April 2011
Karma: 39
|
Senior Member |
|
|
C Boyd wrote on Mon, 26 June 2017 20:55I could use the grease zerks. Are they different from a 76? I thought a 73 was a single hole pin? Even trade?
Chuck,
The holes for the grease passages in a 73 are different than later models. The cavities for each side are not joined. You can not use the greasers that people install on the later models because the hole down the center dead ends.
If you devise a way to drill through that dead end, you could make the greasers work.
At one time I had a short discussion here on the forum with Jim K about that. He was going to look into drilling the pins he sells for the early model GMCs. If he did/does that, the bogie greasers will work on the pin sets he sells.
|
|
|
|
Goto Forum:
Current Time: Mon Nov 18 04:28:56 CST 2024
Total time taken to generate the page: 0.02719 seconds
|
GMCforum
Search
Help
Register
Login
Home
