Home » Public Forums » GMCnet » A6 ac compressor replacement
| A6 ac compressor replacement [message #319518] |
Fri, 23 June 2017 22:06  |
Wayne
Messages: 106
Registered: August 2004
Karma: 0
|
Senior Member |
|
|
I noticed that most of the dash ac compressor replacements Sanden, 4 seasons ect. have a lower displacement
than the oem a6. Any one who has used one of the replacements which one did you use and do you notice any
loss of cold air? (this is if you had a working unit to compare it to)
Wayne Lawrence
76 Birchaven
Bellflower CA
w.lawrence@verizon.net
|
|
|
|
|
|
| Re: [GMCnet] A6 ac compressor replacement [message #319532 is a reply to message #319520] |
Sat, 24 June 2017 12:22  |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
SANDEN 508 CONVERSION KIT
Price: $569.95
KIT INCLUDES SANDEN 508 COMPRESSOR --- 2 NEW HOSE'S AND A NEW MOUNTING BRAC
On Fri, Jun 23, 2017 at 8:39 PM, Jim Kanomata wrote:
> We have supplied to several people that are running duel A/C units off or
> Sanden unit.
> Sanden kit we supply come with mounting to fit the GMC MH slightly
> different than the Toronado.
> You can see it on our sight under Heating/Cooling
>
> On Fri, Jun 23, 2017 at 8:06 PM, Wayne Lawrence
> wrote:
>
>> I noticed that most of the dash ac compressor replacements Sanden, 4
>> seasons ect. have a lower displacement
>> than the oem a6. Any one who has used one of the replacements which one
>> did you use and do you notice any
>> loss of cold air? (this is if you had a working unit to compare it to)
>> --
>> Wayne Lawrence
>> 76 Birchaven
>> Bellflower CA
>> w.lawrence@verizon.net
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Newark,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] A6 ac compressor replacement [message #319536 is a reply to message #319532] |
Sat, 24 June 2017 18:05 |
Wayne
Messages: 106
Registered: August 2004
Karma: 0
|
Senior Member |
|
|
Hay Jim,
I was on your website earlier and also noticed the s6 replacement for our a6. Is either one (s6 or sanden)better than the other?
O by the way I still love the 370. Thank you for that.
Wayne Lawrence
76 Birchaven
Bellflower CA
w.lawrence@verizon.net
|
|
|
|
| Re: [GMCnet] A6 ac compressor replacement [message #319537 is a reply to message #319536] |
Sat, 24 June 2017 18:18 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Wayne, That Aluminum S6 turned out to be a typical Communist Chinese
Crapola.
We sold lot of Vintage Air units with the Sanden compressors and realized
most had run lot of miles on them with no problems.
That's when we went with Sanden and have not had one come back in the 3
years. Most are made in Japan where they make private labels for
Lexus,Acura and others.
We are happy to see you are enjoying the 3.70 Final Drive unit.
When you get a chance try advancing the ignition timing 1-2 degrees as it
will make lot of difference.
On Sat, Jun 24, 2017 at 4:05 PM, Wayne Lawrence
wrote:
> Hay Jim,
> I was on your website earlier and also noticed the s6 replacement for our
> a6. Is either one (s6 or sanden)better than the other?
>
> O by the way I still love the 370. Thank you for that.
> --
> Wayne Lawrence
> 76 Birchaven
> Bellflower CA
> w.lawrence@verizon.net
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] A6 ac compressor replacement [message #319593 is a reply to message #319537] |
Mon, 26 June 2017 09:36 |
Keith V
Messages: 2337
Registered: March 2008
Location: Mounds View,MN
Karma: 0
|
Senior Member |
|
|
I have Jims Sanden replacement, it works great. I have an AUX AC under the couch and I can cool the whole coach nicely.
The only issue is the bolts on the pulley, you HAVE to be careful that they don't hit your hoses when the motor torques over under load as it makes a great saw and will cut you hose. Ask me how I know!
My A6 never worked, so I can't compare
________________________________
From: Gmclist on behalf of Jim Kanomata
Sent: Saturday, June 24, 2017 6:18:47 PM
To: gmclist@list.gmcnet.org
Subject: Re: [GMCnet] A6 ac compressor replacement
Wayne, That Aluminum S6 turned out to be a typical Communist Chinese
Crapola.
We sold lot of Vintage Air units with the Sanden compressors and realized
most had run lot of miles on them with no problems.
That's when we went with Sanden and have not had one come back in the 3
years. Most are made in Japan where they make private labels for
Lexus,Acura and others.
We are happy to see you are enjoying the 3.70 Final Drive unit.
When you get a chance try advancing the ignition timing 1-2 degrees as it
will make lot of difference.
On Sat, Jun 24, 2017 at 4:05 PM, Wayne Lawrence
wrote:
> Hay Jim,
> I was on your website earlier and also noticed the s6 replacement for our
> a6. Is either one (s6 or sanden)better than the other?
>
> O by the way I still love the 370. Thank you for that.
> --
> Wayne Lawrence
> 76 Birchaven
> Bellflower CA
> w.lawrence@verizon.net
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Keith Vasilakes
Mounds View. MN
75 ex Royale GMC
ask me about MicroLevel
Cell, 763-732-3419
My427v8@hotmail.com
|
|
|
|
|
|
|
|
| Re: [GMCnet] A6 ac compressor replacement [message #346711 is a reply to message #319532] |
Wed, 21 August 2019 16:15 |
amansfield1104
Messages: 80
Registered: August 2009
Karma: 0
|
Member |
|
|
I have Jim K’s conversion. Is there a trick to installing the compressor. I the brackets installed. I had to cut clearance for the fuel line but other than that it went on without to much trouble.
Art
> On Jun 24, 2017, at 12:22 PM, Jim Kanomata wrote:
>
>
> SANDEN 508 CONVERSION KIT
> Price: $569.95
> KIT INCLUDES SANDEN 508 COMPRESSOR --- 2 NEW HOSE'S AND A NEW MOUNTING BRAC
>
> On Fri, Jun 23, 2017 at 8:39 PM, Jim Kanomata wrote:
>
>> We have supplied to several people that are running duel A/C units off or
>> Sanden unit.
>> Sanden kit we supply come with mounting to fit the GMC MH slightly
>> different than the Toronado.
>> You can see it on our sight under Heating/Cooling
>>
>> On Fri, Jun 23, 2017 at 8:06 PM, Wayne Lawrence
>> wrote:
>>
>>> I noticed that most of the dash ac compressor replacements Sanden, 4
>>> seasons ect. have a lower displacement
>>> than the oem a6. Any one who has used one of the replacements which one
>>> did you use and do you notice any
>>> loss of cold air? (this is if you had a working unit to compare it to)
>>> --
>>> Wayne Lawrence
>>> 76 Birchaven
>>> Bellflower CA
>>> w.lawrence@verizon.net
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>>
>>
>>
>> --
>> Jim Kanomata
>> Applied/GMC, Newark,CA
>> jimk@appliedairfilters.com
>> http://www.appliedgmc.com
>> 1-800-752-7502
>>
>
>
>
> --
> Jim Kanomata
> Applied/GMC, Newark,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] A6 ac compressor replacement [message #346724 is a reply to message #346711] |
Thu, 22 August 2019 09:33 |
amansfield1104
Messages: 80
Registered: August 2009
Karma: 0
|
Member |
|
|
Never mine I took off the valve cover and had no problem putting the compressor in. Hope this is worth it. Once i get it together I will cut some holes in the front of the box and run two tubes up to provide some cooling. One will be run to the seat by the table to see if it will cool a little back there for my wife. Hope that helps cool down the RV a little where she sits.
Art
> On Aug 21, 2019, at 4:15 PM, amansfield1104--- via Gmclist wrote:
>
> I have Jim K’s conversion. Is there a trick to installing the compressor. I the brackets installed. I had to cut clearance for the fuel line but other than that it went on without to much trouble.
>
> Art
>> On Jun 24, 2017, at 12:22 PM, Jim Kanomata wrote:
>>
>>
>> SANDEN 508 CONVERSION KIT
>> Price: $569.95
>> KIT INCLUDES SANDEN 508 COMPRESSOR --- 2 NEW HOSE'S AND A NEW MOUNTING BRAC
>>
>> On Fri, Jun 23, 2017 at 8:39 PM, Jim Kanomata wrote:
>>
>>> We have supplied to several people that are running duel A/C units off or
>>> Sanden unit.
>>> Sanden kit we supply come with mounting to fit the GMC MH slightly
>>> different than the Toronado.
>>> You can see it on our sight under Heating/Cooling
>>>
>>> On Fri, Jun 23, 2017 at 8:06 PM, Wayne Lawrence
>>> wrote:
>>>
>>>> I noticed that most of the dash ac compressor replacements Sanden, 4
>>>> seasons ect. have a lower displacement
>>>> than the oem a6. Any one who has used one of the replacements which one
>>>> did you use and do you notice any
>>>> loss of cold air? (this is if you had a working unit to compare it to)
>>>> --
>>>> Wayne Lawrence
>>>> 76 Birchaven
>>>> Bellflower CA
>>>> w.lawrence@verizon.net
>>>>
>>>> _______________________________________________
>>>> GMCnet mailing list
>>>> Unsubscribe or Change List Options:
>>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>>
>>>
>>>
>>>
>>> --
>>> Jim Kanomata
>>> Applied/GMC, Newark,CA
>>> jimk@appliedairfilters.com
>>> http://www.appliedgmc.com
>>> 1-800-752-7502
>>>
>>
>>
>>
>> --
>> Jim Kanomata
>> Applied/GMC, Newark,CA
>> jimk@appliedairfilters.com
>> http://www.appliedgmc.com
>> 1-800-752-7502
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] A6 ac compressor replacement [message #346727 is a reply to message #346724] |
Thu, 22 August 2019 11:28 |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Art,
I don't quite understand your post, but what I think you're proposing to do
is to add ductwork from the front of the HVAC box, through the firewall to
provide more airflow into the cockpit. That MAY help with cooling -- quite
a few people have done something similar. BUT, the fairly recent
experience of a friend prompts me to issue a caution: Their engine battery
"exploded", causing a sudden burst of flame. The flame should have
followed the firewall up to the base of the windshield and perhaps been
extinguished for lack of oxygen. Or, at worst, burned through to the
outside of the windshield. Unfortunately, a PO had added a plastic duct
firewall above the passenger's feet. That duct was immediately burned
through, allowing the flame to penetrate the firewall, and follow the
cockpit side of it up behind the dashboard, along the inside of the
windshield, over the passenger's head, etc., all the way to the back of the
coach. Essentially everything above the beltline was burned or badly smoke
damaged. Little damage below the beltline.
Without that ductwork through the firewall, the coach might well have still
been totalled -- but with little or no interior damage.
Just something to think about. I know if I were tempted as you are, I'd
use very fire resistant materials (my custom HVAC box is made of 12 gauge
aluminum).
Ken H.
Americus, GA
'76 X-Birchaven w/Cad500/Howell EFI & EBL,
Manny Brakes & 1-Ton, Troy-Bilt APU, etc., etc., etc.
www.gmcwipersetc.com
On Thu, Aug 22, 2019 at 10:33 AM amansfield1104--- via Gmclist <
gmclist@list.gmcnet.org> wrote:
> Never mine I took off the valve cover and had no problem putting the
> compressor in. Hope this is worth it. Once i get it together I will cut
> some holes in the front of the box and run two tubes up to provide some
> cooling. One will be run to the seat by the table to see if it will cool a
> little back there for my wife. Hope that helps cool down the RV a little
> where she sits.
>
> Art
>> On Aug 21, 2019, at 4:15 PM, amansfield1104--- via Gmclist gmclist@list.gmcnet.org> wrote:
>>
>> I have Jim K’s conversion. Is there a trick to installing the
> compressor. I the brackets installed. I had to cut clearance for the fuel
> line but other than that it went on without to much trouble.
>>
>> Art
>>> On Jun 24, 2017, at 12:22 PM, Jim Kanomata
> wrote:
>>>
>>>
>>> SANDEN 508 CONVERSION KIT
>>> Price: $569.95
>>> KIT INCLUDES SANDEN 508 COMPRESSOR --- 2 NEW HOSE'S AND A NEW MOUNTING
> BRAC
>>>
>>> On Fri, Jun 23, 2017 at 8:39 PM, Jim Kanomata
> wrote:
>>>
>>>> We have supplied to several people that are running duel A/C units off
> or
>>>> Sanden unit.
>>>> Sanden kit we supply come with mounting to fit the GMC MH slightly
>>>> different than the Toronado.
>>>> You can see it on our sight under Heating/Cooling
>>>>
>>>> On Fri, Jun 23, 2017 at 8:06 PM, Wayne Lawrence w.lawrence@verizon.net>
>>>> wrote:
>>>>
>>>> > I noticed that most of the dash ac compressor replacements Sanden, 4
>>>> > seasons ect. have a lower displacement
>>>> > than the oem a6. Any one who has used one of the replacements which
> one
>>>> > did you use and do you notice any
>>>> > loss of cold air? (this is if you had a working unit to compare it to)
>>>> > --
>>>> > Wayne Lawrence
>>>> > 76 Birchaven
>>>> > Bellflower CA
>>>> > w.lawrence@verizon.net
>>>> >
>>>> > _______________________________________________
>>>> > GMCnet mailing list
>>>> > Unsubscribe or Change List Options:
>>>> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>> >
>>>>
>>>>
>>>>
>>>> --
>>>> Jim Kanomata
>>>> Applied/GMC, Newark,CA
>>>> jimk@appliedairfilters.com
>>>> http://www.appliedgmc.com
>>>> 1-800-752-7502
>>>>
>>>
>>>
>>>
>>> --
>>> Jim Kanomata
>>> Applied/GMC, Newark,CA
>>> jimk@appliedairfilters.com
>>> http://www.appliedgmc.com
>>> 1-800-752-7502
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
| Re: [GMCnet] A6 ac compressor replacement [message #346729 is a reply to message #346727] |
Thu, 22 August 2019 12:23 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Not sure of the posting, however our Sanden compressor bracket does not
require it to be removed should the valve cover need be removed. Nice
benefit.
On Thu, Aug 22, 2019 at 9:29 AM Ken Henderson via Gmclist <
gmclist@list.gmcnet.org> wrote:
> Art,
>
> I don't quite understand your post, but what I think you're proposing to do
> is to add ductwork from the front of the HVAC box, through the firewall to
> provide more airflow into the cockpit. That MAY help with cooling -- quite
> a few people have done something similar. BUT, the fairly recent
> experience of a friend prompts me to issue a caution: Their engine battery
> "exploded", causing a sudden burst of flame. The flame should have
> followed the firewall up to the base of the windshield and perhaps been
> extinguished for lack of oxygen. Or, at worst, burned through to the
> outside of the windshield. Unfortunately, a PO had added a plastic duct
> firewall above the passenger's feet. That duct was immediately burned
> through, allowing the flame to penetrate the firewall, and follow the
> cockpit side of it up behind the dashboard, along the inside of the
> windshield, over the passenger's head, etc., all the way to the back of the
> coach. Essentially everything above the beltline was burned or badly smoke
> damaged. Little damage below the beltline.
>
> Without that ductwork through the firewall, the coach might well have still
> been totalled -- but with little or no interior damage.
>
> Just something to think about. I know if I were tempted as you are, I'd
> use very fire resistant materials (my custom HVAC box is made of 12 gauge
> aluminum).
>
> Ken H.
> Americus, GA
> '76 X-Birchaven w/Cad500/Howell EFI & EBL,
> Manny Brakes & 1-Ton, Troy-Bilt APU, etc., etc., etc.
> www.gmcwipersetc.com
>
>
> On Thu, Aug 22, 2019 at 10:33 AM amansfield1104--- via Gmclist gmclist@list.gmcnet.org> wrote:
>
>> Never mine I took off the valve cover and had no problem putting the
>> compressor in. Hope this is worth it. Once i get it together I will cut
>> some holes in the front of the box and run two tubes up to provide some
>> cooling. One will be run to the seat by the table to see if it will cool
> a
>> little back there for my wife. Hope that helps cool down the RV a little
>> where she sits.
>>
>> Art
>>> On Aug 21, 2019, at 4:15 PM, amansfield1104--- via Gmclist > gmclist@list.gmcnet.org> wrote:
>>>
>>> I have Jim K’s conversion. Is there a trick to installing the
>> compressor. I the brackets installed. I had to cut clearance for the
> fuel
>> line but other than that it went on without to much trouble.
>>>
>>> Art
>>>> On Jun 24, 2017, at 12:22 PM, Jim Kanomata
>> wrote:
>>>>
>>>>
>>>> SANDEN 508 CONVERSION KIT
>>>> Price: $569.95
>>>> KIT INCLUDES SANDEN 508 COMPRESSOR --- 2 NEW HOSE'S AND A NEW MOUNTING
>> BRAC
>>>>
>>>> On Fri, Jun 23, 2017 at 8:39 PM, Jim Kanomata
>> wrote:
>>>>
>>>> > We have supplied to several people that are running duel A/C units
> off
>> or
>>>> > Sanden unit.
>>>> > Sanden kit we supply come with mounting to fit the GMC MH slightly
>>>> > different than the Toronado.
>>>> > You can see it on our sight under Heating/Cooling
>>>> >
>>>> > On Fri, Jun 23, 2017 at 8:06 PM, Wayne Lawrence > w.lawrence@verizon.net>
>>>> > wrote:
>>>> >
>>>> >> I noticed that most of the dash ac compressor replacements Sanden, 4
>>>> >> seasons ect. have a lower displacement
>>>> >> than the oem a6. Any one who has used one of the replacements which
>> one
>>>> >> did you use and do you notice any
>>>> >> loss of cold air? (this is if you had a working unit to compare it
> to)
>>>> >> --
>>>> >> Wayne Lawrence
>>>> >> 76 Birchaven
>>>> >> Bellflower CA
>>>> >> w.lawrence@verizon.net
>>>> >>
>>>> >> _______________________________________________
>>>> >> GMCnet mailing list
>>>> >> Unsubscribe or Change List Options:
>>>> >> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>> >>
>>>> >
>>>> >
>>>> >
>>>> > --
>>>> > Jim Kanomata
>>>> > Applied/GMC, Newark,CA
>>>> > jimk@appliedairfilters.com
>>>> > http://www.appliedgmc.com
>>>> > 1-800-752-7502
>>>> >
>>>>
>>>>
>>>>
>>>> --
>>>> Jim Kanomata
>>>> Applied/GMC, Newark,CA
>>>> jimk@appliedairfilters.com
>>>> http://www.appliedgmc.com
>>>> 1-800-752-7502
>>>> _______________________________________________
>>>> GMCnet mailing list
>>>> Unsubscribe or Change List Options:
>>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
| Re: [GMCnet] A6 ac compressor replacement [message #346730 is a reply to message #346729] |
Thu, 22 August 2019 12:42 |
sgltrac
Messages: 2797
Registered: April 2011
Karma: 1
|
Senior Member |
|
|
FWIW I would make sure the genny works and run the roof ac to keep the
coach cooler in really hot conditions before I would embark on a project as
ambitious as building and running all that ductwork.
Sully
Bellevue wa
On Thu, Aug 22, 2019 at 10:24 AM Jim Kanomata via Gmclist <
gmclist@list.gmcnet.org> wrote:
> Not sure of the posting, however our Sanden compressor bracket does not
> require it to be removed should the valve cover need be removed. Nice
> benefit.
>
> On Thu, Aug 22, 2019 at 9:29 AM Ken Henderson via Gmclist gmclist@list.gmcnet.org> wrote:
>
>> Art,
>>
>> I don't quite understand your post, but what I think you're proposing to
> do
>> is to add ductwork from the front of the HVAC box, through the firewall
> to
>> provide more airflow into the cockpit. That MAY help with cooling --
> quite
>> a few people have done something similar. BUT, the fairly recent
>> experience of a friend prompts me to issue a caution: Their engine
> battery
>> "exploded", causing a sudden burst of flame. The flame should have
>> followed the firewall up to the base of the windshield and perhaps been
>> extinguished for lack of oxygen. Or, at worst, burned through to the
>> outside of the windshield. Unfortunately, a PO had added a plastic duct
>> firewall above the passenger's feet. That duct was immediately burned
>> through, allowing the flame to penetrate the firewall, and follow the
>> cockpit side of it up behind the dashboard, along the inside of the
>> windshield, over the passenger's head, etc., all the way to the back of
> the
>> coach. Essentially everything above the beltline was burned or badly
> smoke
>> damaged. Little damage below the beltline.
>>
>> Without that ductwork through the firewall, the coach might well have
> still
>> been totalled -- but with little or no interior damage.
>>
>> Just something to think about. I know if I were tempted as you are, I'd
>> use very fire resistant materials (my custom HVAC box is made of 12 gauge
>> aluminum).
>>
>> Ken H.
>> Americus, GA
>> '76 X-Birchaven w/Cad500/Howell EFI & EBL,
>> Manny Brakes & 1-Ton, Troy-Bilt APU, etc., etc., etc.
>> www.gmcwipersetc.com
>>
>>
>> On Thu, Aug 22, 2019 at 10:33 AM amansfield1104--- via Gmclist > gmclist@list.gmcnet.org> wrote:
>>
>>> Never mine I took off the valve cover and had no problem putting the
>>> compressor in. Hope this is worth it. Once i get it together I will
> cut
>>> some holes in the front of the box and run two tubes up to provide some
>>> cooling. One will be run to the seat by the table to see if it will
> cool
>> a
>>> little back there for my wife. Hope that helps cool down the RV a
> little
>>> where she sits.
>>>
>>> Art
>>>> On Aug 21, 2019, at 4:15 PM, amansfield1104--- via Gmclist >> gmclist@list.gmcnet.org> wrote:
>>>>
>>>> I have Jim K’s conversion. Is there a trick to installing the
>>> compressor. I the brackets installed. I had to cut clearance for the
>> fuel
>>> line but other than that it went on without to much trouble.
>>>>
>>>> Art
>>>> > On Jun 24, 2017, at 12:22 PM, Jim Kanomata
>>> wrote:
>>>> >
>>>> >
>>>> > SANDEN 508 CONVERSION KIT
>>>> > Price: $569.95
>>>> > KIT INCLUDES SANDEN 508 COMPRESSOR --- 2 NEW HOSE'S AND A NEW
> MOUNTING
>>> BRAC
>>>> >
>>>> > On Fri, Jun 23, 2017 at 8:39 PM, Jim Kanomata jimkanomata@gmail.com>
>>> wrote:
>>>> >
>>>> >> We have supplied to several people that are running duel A/C units
>> off
>>> or
>>>> >> Sanden unit.
>>>> >> Sanden kit we supply come with mounting to fit the GMC MH slightly
>>>> >> different than the Toronado.
>>>> >> You can see it on our sight under Heating/Cooling
>>>> >>
>>>> >> On Fri, Jun 23, 2017 at 8:06 PM, Wayne Lawrence >> w.lawrence@verizon.net>
>>>> >> wrote:
>>>> >>
>>>> >>> I noticed that most of the dash ac compressor replacements
> Sanden, 4
>>>> >>> seasons ect. have a lower displacement
>>>> >>> than the oem a6. Any one who has used one of the replacements
> which
>>> one
>>>> >>> did you use and do you notice any
>>>> >>> loss of cold air? (this is if you had a working unit to compare it
>> to)
>>>> >>> --
>>>> >>> Wayne Lawrence
>>>> >>> 76 Birchaven
>>>> >>> Bellflower CA
>>>> >>> w.lawrence@verizon.net
>>>> >>>
>>>> >>> _______________________________________________
>>>> >>> GMCnet mailing list
>>>> >>> Unsubscribe or Change List Options:
>>>> >>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>> >>>
>>>> >>
>>>> >>
>>>> >>
>>>> >> --
>>>> >> Jim Kanomata
>>>> >> Applied/GMC, Newark,CA
>>>> >> jimk@appliedairfilters.com
>>>> >> http://www.appliedgmc.com
>>>> >> 1-800-752-7502
>>>> >>
>>>> >
>>>> >
>>>> >
>>>> > --
>>>> > Jim Kanomata
>>>> > Applied/GMC, Newark,CA
>>>> > jimk@appliedairfilters.com
>>>> > http://www.appliedgmc.com
>>>> > 1-800-752-7502
>>>> > _______________________________________________
>>>> > GMCnet mailing list
>>>> > Unsubscribe or Change List Options:
>>>> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>>
>>>>
>>>> _______________________________________________
>>>> GMCnet mailing list
>>>> Unsubscribe or Change List Options:
>>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>
>
> --
> Jim Kanomata
> Applied/GMC, Newark,CA
> jimk@appliedairfilters.com
> http://www.appliedgmc.com
> 1-800-752-7502
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Sully
77 Royale basket case.
Future motorhome land speed record holder(bucket list)
Seattle, Wa.
|
|
|
|
| Re: [GMCnet] A6 ac compressor replacement [message #346734 is a reply to message #346727] |
Thu, 22 August 2019 17:29 |
amansfield1104
Messages: 80
Registered: August 2009
Karma: 0
|
Member |
|
|
Thanks Ken. Something to think about. I need to get some air back where the table is. I guess I’ll see if I can get some metal tubing to run thru the firewall. I have the fire extinguisher set up which will help some but I removed the fender liners to see if that helps with vapor lock problems I been having.
Art
> On Aug 22, 2019, at 11:28 AM, Ken Henderson via Gmclist wrote:
>
> Art,
>
> I don't quite understand your post, but what I think you're proposing to do
> is to add ductwork from the front of the HVAC box, through the firewall to
> provide more airflow into the cockpit. That MAY help with cooling -- quite
> a few people have done something similar. BUT, the fairly recent
> experience of a friend prompts me to issue a caution: Their engine battery
> "exploded", causing a sudden burst of flame. The flame should have
> followed the firewall up to the base of the windshield and perhaps been
> extinguished for lack of oxygen. Or, at worst, burned through to the
> outside of the windshield. Unfortunately, a PO had added a plastic duct
> firewall above the passenger's feet. That duct was immediately burned
> through, allowing the flame to penetrate the firewall, and follow the
> cockpit side of it up behind the dashboard, along the inside of the
> windshield, over the passenger's head, etc., all the way to the back of the
> coach. Essentially everything above the beltline was burned or badly smoke
> damaged. Little damage below the beltline.
>
> Without that ductwork through the firewall, the coach might well have still
> been totalled -- but with little or no interior damage.
>
> Just something to think about. I know if I were tempted as you are, I'd
> use very fire resistant materials (my custom HVAC box is made of 12 gauge
> aluminum).
>
> Ken H.
> Americus, GA
> '76 X-Birchaven w/Cad500/Howell EFI & EBL,
> Manny Brakes & 1-Ton, Troy-Bilt APU, etc., etc., etc.
> www.gmcwipersetc.com
>
>
> On Thu, Aug 22, 2019 at 10:33 AM amansfield1104--- via Gmclist gmclist@list.gmcnet.org> wrote:
>
>> Never mine I took off the valve cover and had no problem putting the
>> compressor in. Hope this is worth it. Once i get it together I will cut
>> some holes in the front of the box and run two tubes up to provide some
>> cooling. One will be run to the seat by the table to see if it will cool a
>> little back there for my wife. Hope that helps cool down the RV a little
>> where she sits.
>>
>> Art
>>> On Aug 21, 2019, at 4:15 PM, amansfield1104--- via Gmclist > gmclist@list.gmcnet.org> wrote:
>>>
>>> I have Jim K’s conversion. Is there a trick to installing the
>> compressor. I the brackets installed. I had to cut clearance for the fuel
>> line but other than that it went on without to much trouble.
>>>
>>> Art
>>>> On Jun 24, 2017, at 12:22 PM, Jim Kanomata
>> wrote:
>>>>
>>>>
>>>> SANDEN 508 CONVERSION KIT
>>>> Price: $569.95
>>>> KIT INCLUDES SANDEN 508 COMPRESSOR --- 2 NEW HOSE'S AND A NEW MOUNTING
>> BRAC
>>>>
>>>> On Fri, Jun 23, 2017 at 8:39 PM, Jim Kanomata
>> wrote:
>>>>
>>>> > We have supplied to several people that are running duel A/C units off
>> or
>>>> > Sanden unit.
>>>> > Sanden kit we supply come with mounting to fit the GMC MH slightly
>>>> > different than the Toronado.
>>>> > You can see it on our sight under Heating/Cooling
>>>> >
>>>> > On Fri, Jun 23, 2017 at 8:06 PM, Wayne Lawrence > w.lawrence@verizon.net>
>>>> > wrote:
>>>> >
>>>> >> I noticed that most of the dash ac compressor replacements Sanden, 4
>>>> >> seasons ect. have a lower displacement
>>>> >> than the oem a6. Any one who has used one of the replacements which
>> one
>>>> >> did you use and do you notice any
>>>> >> loss of cold air? (this is if you had a working unit to compare it to)
>>>> >> --
>>>> >> Wayne Lawrence
>>>> >> 76 Birchaven
>>>> >> Bellflower CA
>>>> >> w.lawrence@verizon.net
>>>> >>
>>>> >> _______________________________________________
>>>> >> GMCnet mailing list
>>>> >> Unsubscribe or Change List Options:
>>>> >> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>> >>
>>>> >
>>>> >
>>>> >
>>>> > --
>>>> > Jim Kanomata
>>>> > Applied/GMC, Newark,CA
>>>> > jimk@appliedairfilters.com
>>>> > http://www.appliedgmc.com
>>>> > 1-800-752-7502
>>>> >
>>>>
>>>>
>>>>
>>>> --
>>>> Jim Kanomata
>>>> Applied/GMC, Newark,CA
>>>> jimk@appliedairfilters.com
>>>> http://www.appliedgmc.com
>>>> 1-800-752-7502
>>>> _______________________________________________
>>>> GMCnet mailing list
>>>> Unsubscribe or Change List Options:
>>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] A6 ac compressor replacement [message #346735 is a reply to message #346730] |
Thu, 22 August 2019 17:35 |
Arthur Mansfield
Messages: 290
Registered: April 2010
Karma: 0
|
Senior Member |
|
|
Todd I would if I thought I had a chance to make it work. It’s hard to fix when it run fine at home. I ran it for 4 hours the last time before i left for a trip. It quit within 30 minutes when on the road. I do not know what to do. I changed the coil, I changed the condenser, replaced all the diode. I plan to replace the oil sensor and change the oil. Then insulate the fuel line that runs under the generator.
Art
> On Aug 22, 2019, at 12:42 PM, Todd Sullivan via Gmclist wrote:
>
> FWIW I would make sure the genny works and run the roof ac to keep the
> coach cooler in really hot conditions before I would embark on a project as
> ambitious as building and running all that ductwork.
>
> Sully
> Bellevue wa
>
> On Thu, Aug 22, 2019 at 10:24 AM Jim Kanomata via Gmclist gmclist@list.gmcnet.org> wrote:
>
>> Not sure of the posting, however our Sanden compressor bracket does not
>> require it to be removed should the valve cover need be removed. Nice
>> benefit.
>>
>> On Thu, Aug 22, 2019 at 9:29 AM Ken Henderson via Gmclist > gmclist@list.gmcnet.org> wrote:
>>
>>> Art,
>>>
>>> I don't quite understand your post, but what I think you're proposing to
>> do
>>> is to add ductwork from the front of the HVAC box, through the firewall
>> to
>>> provide more airflow into the cockpit. That MAY help with cooling --
>> quite
>>> a few people have done something similar. BUT, the fairly recent
>>> experience of a friend prompts me to issue a caution: Their engine
>> battery
>>> "exploded", causing a sudden burst of flame. The flame should have
>>> followed the firewall up to the base of the windshield and perhaps been
>>> extinguished for lack of oxygen. Or, at worst, burned through to the
>>> outside of the windshield. Unfortunately, a PO had added a plastic duct
>>> firewall above the passenger's feet. That duct was immediately burned
>>> through, allowing the flame to penetrate the firewall, and follow the
>>> cockpit side of it up behind the dashboard, along the inside of the
>>> windshield, over the passenger's head, etc., all the way to the back of
>> the
>>> coach. Essentially everything above the beltline was burned or badly
>> smoke
>>> damaged. Little damage below the beltline.
>>>
>>> Without that ductwork through the firewall, the coach might well have
>> still
>>> been totalled -- but with little or no interior damage.
>>>
>>> Just something to think about. I know if I were tempted as you are, I'd
>>> use very fire resistant materials (my custom HVAC box is made of 12 gauge
>>> aluminum).
>>>
>>> Ken H.
>>> Americus, GA
>>> '76 X-Birchaven w/Cad500/Howell EFI & EBL,
>>> Manny Brakes & 1-Ton, Troy-Bilt APU, etc., etc., etc.
>>> www.gmcwipersetc.com
>>>
>>>
>>> On Thu, Aug 22, 2019 at 10:33 AM amansfield1104--- via Gmclist >> gmclist@list.gmcnet.org> wrote:
>>>
>>>> Never mine I took off the valve cover and had no problem putting the
>>>> compressor in. Hope this is worth it. Once i get it together I will
>> cut
>>>> some holes in the front of the box and run two tubes up to provide some
>>>> cooling. One will be run to the seat by the table to see if it will
>> cool
>>> a
>>>> little back there for my wife. Hope that helps cool down the RV a
>> little
>>>> where she sits.
>>>>
>>>> Art
>>>> > On Aug 21, 2019, at 4:15 PM, amansfield1104--- via Gmclist >>> gmclist@list.gmcnet.org> wrote:
>>>> >
>>>> > I have Jim K’s conversion. Is there a trick to installing the
>>>> compressor. I the brackets installed. I had to cut clearance for the
>>> fuel
>>>> line but other than that it went on without to much trouble.
>>>> >
>>>> > Art
>>>> >> On Jun 24, 2017, at 12:22 PM, Jim Kanomata
>>>> wrote:
>>>> >>
>>>> >>
>>>> >> SANDEN 508 CONVERSION KIT
>>>> >> Price: $569.95
>>>> >> KIT INCLUDES SANDEN 508 COMPRESSOR --- 2 NEW HOSE'S AND A NEW
>> MOUNTING
>>>> BRAC
>>>> >>
>>>> >> On Fri, Jun 23, 2017 at 8:39 PM, Jim Kanomata > jimkanomata@gmail.com>
>>>> wrote:
>>>> >>
>>>> >>> We have supplied to several people that are running duel A/C units
>>> off
>>>> or
>>>> >>> Sanden unit.
>>>> >>> Sanden kit we supply come with mounting to fit the GMC MH slightly
>>>> >>> different than the Toronado.
>>>> >>> You can see it on our sight under Heating/Cooling
>>>> >>>
>>>> >>> On Fri, Jun 23, 2017 at 8:06 PM, Wayne Lawrence >>> w.lawrence@verizon.net>
>>>> >>> wrote:
>>>> >>>
>>>> >>>> I noticed that most of the dash ac compressor replacements
>> Sanden, 4
>>>> >>>> seasons ect. have a lower displacement
>>>> >>>> than the oem a6. Any one who has used one of the replacements
>> which
>>>> one
>>>> >>>> did you use and do you notice any
>>>> >>>> loss of cold air? (this is if you had a working unit to compare it
>>> to)
>>>> >>>> --
>>>> >>>> Wayne Lawrence
>>>> >>>> 76 Birchaven
>>>> >>>> Bellflower CA
>>>> >>>> w.lawrence@verizon.net
>>>> >>>>
>>>> >>>> _______________________________________________
>>>> >>>> GMCnet mailing list
>>>> >>>> Unsubscribe or Change List Options:
>>>> >>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>> >>>>
>>>> >>>
>>>> >>>
>>>> >>>
>>>> >>> --
>>>> >>> Jim Kanomata
>>>> >>> Applied/GMC, Newark,CA
>>>> >>> jimk@appliedairfilters.com
>>>> >>> http://www.appliedgmc.com
>>>> >>> 1-800-752-7502
>>>> >>>
>>>> >>
>>>> >>
>>>> >>
>>>> >> --
>>>> >> Jim Kanomata
>>>> >> Applied/GMC, Newark,CA
>>>> >> jimk@appliedairfilters.com
>>>> >> http://www.appliedgmc.com
>>>> >> 1-800-752-7502
>>>> >> _______________________________________________
>>>> >> GMCnet mailing list
>>>> >> Unsubscribe or Change List Options:
>>>> >> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>> >
>>>> >
>>>> > _______________________________________________
>>>> > GMCnet mailing list
>>>> > Unsubscribe or Change List Options:
>>>> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>>
>>>>
>>>> _______________________________________________
>>>> GMCnet mailing list
>>>> Unsubscribe or Change List Options:
>>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>>
>>
>> --
>> Jim Kanomata
>> Applied/GMC, Newark,CA
>> jimk@appliedairfilters.com
>> http://www.appliedgmc.com
>> 1-800-752-7502
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] A6 ac compressor replacement [message #346736 is a reply to message #346734] |
Thu, 22 August 2019 17:39 |
Dolph Santorine
Messages: 1236
Registered: April 2011
Location: Wheeling, WV
Karma: -41
|
Senior Member |
|
|
Art
Why don’t you run the genset and the roof air?
Dolph Santorine
DE AD0LF
Wheeling, West Virginia
1977 ex-Palm Beach TZE167V100820
Howell EFI/EBL , Reaction Arms, Manny Transmission
> On Aug 22, 2019, at 6:29 PM, amansfield1104--- via Gmclist wrote:
>
> Thanks Ken. Something to think about. I need to get some air back where the table is. I guess I’ll see if I can get some metal tubing to run thru the firewall. I have the fire extinguisher set up which will help some but I removed the fender liners to see if that helps with vapor lock problems I been having.
>
> Art
>> On Aug 22, 2019, at 11:28 AM, Ken Henderson via Gmclist wrote:
>>
>> Art,
>>
>> I don't quite understand your post, but what I think you're proposing to do
>> is to add ductwork from the front of the HVAC box, through the firewall to
>> provide more airflow into the cockpit. That MAY help with cooling -- quite
>> a few people have done something similar. BUT, the fairly recent
>> experience of a friend prompts me to issue a caution: Their engine battery
>> "exploded", causing a sudden burst of flame. The flame should have
>> followed the firewall up to the base of the windshield and perhaps been
>> extinguished for lack of oxygen. Or, at worst, burned through to the
>> outside of the windshield. Unfortunately, a PO had added a plastic duct
>> firewall above the passenger's feet. That duct was immediately burned
>> through, allowing the flame to penetrate the firewall, and follow the
>> cockpit side of it up behind the dashboard, along the inside of the
>> windshield, over the passenger's head, etc., all the way to the back of the
>> coach. Essentially everything above the beltline was burned or badly smoke
>> damaged. Little damage below the beltline.
>>
>> Without that ductwork through the firewall, the coach might well have still
>> been totalled -- but with little or no interior damage.
>>
>> Just something to think about. I know if I were tempted as you are, I'd
>> use very fire resistant materials (my custom HVAC box is made of 12 gauge
>> aluminum).
>>
>> Ken H.
>> Americus, GA
>> '76 X-Birchaven w/Cad500/Howell EFI & EBL,
>> Manny Brakes & 1-Ton, Troy-Bilt APU, etc., etc., etc.
>> www.gmcwipersetc.com
>>
>>
>> On Thu, Aug 22, 2019 at 10:33 AM amansfield1104--- via Gmclist > gmclist@list.gmcnet.org> wrote:
>>
>>> Never mine I took off the valve cover and had no problem putting the
>>> compressor in. Hope this is worth it. Once i get it together I will cut
>>> some holes in the front of the box and run two tubes up to provide some
>>> cooling. One will be run to the seat by the table to see if it will cool a
>>> little back there for my wife. Hope that helps cool down the RV a little
>>> where she sits.
>>>
>>> Art
>>>> On Aug 21, 2019, at 4:15 PM, amansfield1104--- via Gmclist >> gmclist@list.gmcnet.org> wrote:
>>>>
>>>> I have Jim K’s conversion. Is there a trick to installing the
>>> compressor. I the brackets installed. I had to cut clearance for the fuel
>>> line but other than that it went on without to much trouble.
>>>>
>>>> Art
>>>> > On Jun 24, 2017, at 12:22 PM, Jim Kanomata
>>> wrote:
>>>> >
>>>> >
>>>> > SANDEN 508 CONVERSION KIT
>>>> > Price: $569.95
>>>> > KIT INCLUDES SANDEN 508 COMPRESSOR --- 2 NEW HOSE'S AND A NEW MOUNTING
>>> BRAC
>>>> >
>>>> > On Fri, Jun 23, 2017 at 8:39 PM, Jim Kanomata
>>> wrote:
>>>> >
>>>> >> We have supplied to several people that are running duel A/C units off
>>> or
>>>> >> Sanden unit.
>>>> >> Sanden kit we supply come with mounting to fit the GMC MH slightly
>>>> >> different than the Toronado.
>>>> >> You can see it on our sight under Heating/Cooling
>>>> >>
>>>> >> On Fri, Jun 23, 2017 at 8:06 PM, Wayne Lawrence >> w.lawrence@verizon.net>
>>>> >> wrote:
>>>> >>
>>>> >>> I noticed that most of the dash ac compressor replacements Sanden, 4
>>>> >>> seasons ect. have a lower displacement
>>>> >>> than the oem a6. Any one who has used one of the replacements which
>>> one
>>>> >>> did you use and do you notice any
>>>> >>> loss of cold air? (this is if you had a working unit to compare it to)
>>>> >>> --
>>>> >>> Wayne Lawrence
>>>> >>> 76 Birchaven
>>>> >>> Bellflower CA
>>>> >>> w.lawrence@verizon.net
>>>> >>>
>>>> >>> _______________________________________________
>>>> >>> GMCnet mailing list
>>>> >>> Unsubscribe or Change List Options:
>>>> >>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>> >>>
>>>> >>
>>>> >>
>>>> >>
>>>> >> --
>>>> >> Jim Kanomata
>>>> >> Applied/GMC, Newark,CA
>>>> >> jimk@appliedairfilters.com
>>>> >> http://www.appliedgmc.com
>>>> >> 1-800-752-7502
>>>> >>
>>>> >
>>>> >
>>>> >
>>>> > --
>>>> > Jim Kanomata
>>>> > Applied/GMC, Newark,CA
>>>> > jimk@appliedairfilters.com
>>>> > http://www.appliedgmc.com
>>>> > 1-800-752-7502
>>>> > _______________________________________________
>>>> > GMCnet mailing list
>>>> > Unsubscribe or Change List Options:
>>>> > http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>>
>>>>
>>>> _______________________________________________
>>>> GMCnet mailing list
>>>> Unsubscribe or Change List Options:
>>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
|
|
| Re: [GMCnet] A6 ac compressor replacement [message #346740 is a reply to message #346738] |
Thu, 22 August 2019 18:23 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
Sometimes it is the oil pressure switch that is shutting it off. Need to
install a lower pressure sender.
On Thu, Aug 22, 2019 at 4:14 PM Larry Davick via Gmclist <
gmclist@list.gmcnet.org> wrote:
> It runs fine at home, but quits on the road. Could the fuel vents be
> clogged enough so that the little Onan pump can't get gas, but the engine
> pump
> can overcome the vacuum? I don't remember off the top of my head, but the
> fuel system has a goofy venting system that when working well saves the
> vapor for combustion. What if you try driving with the gas cap off for a
> while?
> --
> Larry Davick
> A Mystery Machine
> 1976(ish) Palm Beach
> Fremont, Ca
> Howell EFI + EBL + Electronic Dizzy
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Newark,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
|
|
| Re: A6 ac compressor replacement [message #346744 is a reply to message #319518] |
Thu, 22 August 2019 20:21 |
JohnL455
Messages: 4447
Registered: October 2006
Location: Woodstock, IL
Karma: 12
|
Senior Member |
|
|
Onans that run fine at home then die on the road is usually a kinked fuel hose between the nipple on the drawer floor and the fuel pump. There was a factory spring to dress the hose but those have rusted away years ago Drawer closed, line kinks and reduces fuel flow just enough to eventually not keep up.
John Lebetski
Woodstock, IL
77 Eleganza II
|
|
|
|
Goto Forum:
Current Time: Wed Sep 18 18:06:11 CDT 2024
Total time taken to generate the page: 0.03645 seconds
|
GMCforum
Search
Help
Register
Login
Home
