Ken Henderson Messages: 8726 Registered: March 2004 Location: Americus, GA
Karma:
Senior Member
John,
IIRC, you're thinking of the front wheel bearing seal. From the drawing I
posted, it appears virtually impossible for the metal to touch the
bearing. But the rubber is separated from it only by about the distance
the seal should be left proud of the hub.
On Tue, May 30, 2017 at 9:19 AM, John R. Lebetski
wrote:
> I think I kept the box from the SFK seal from last year and will see if
> same number. IIRC the fail made is that the wrong one has the metal touching
>
> the bearing resulting in metal particles in the rollers. If it were just
> the rubber wearing and not sealing that would almost be better.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options: http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach