GMCforum: GMCnet » Finally mounted my Digipanel oil pressure sensor

Home » Public Forums » GMCnet » Finally mounted my Digipanel oil pressure sensor

Show: Today's Messages :: Polls :: Message Navigator

Finally mounted my Digipanel oil pressure sensor [message #318150]

Mon, 29 May 2017 13:38

RF_Burns

Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada

Karma: 3

Senior Member

How I mounted dual oil pressure sensors. The second sensor for Digipanel.

I had seen several different installations, but both looked unweildy. I used the T fitting shown and fastened both sensors as shown in the photo. The original dash sensor is smaller so I mounted it horizontal through the horse collar bracket.
http://www.gmcmhphotos.com/photos/misc/p63221-mounting-dual-oil-pressure-sendors.html

Bend the electrical tab back on the forward facing sensor to lessen damage in case a belt breaks. I made sure neither sensor would rub on anything.
http://www.gmcmhphotos.com/photos/misc/p63220-mounting-dual-oil-pressure-sendors.html

Just what I did.

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

Previous Topic:	How to measure for accurate hole drilling?
Next Topic:	GMCer broke down in Birmingham

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Jun 28 00:18:38 CDT 2024

Total time taken to generate the page: 0.06584 seconds