GMCforum: GMCnet » How to measure for accurate hole drilling?

Home » Public Forums » GMCnet » How to measure for accurate hole drilling?

Show: Today's Messages :: Polls :: Message Navigator

Re: How to measure for accurate hole drilling? [message #317245 is a reply to message #317163]

Tue, 09 May 2017 07:59

Matt Colie

Messages: 8547
Registered: March 2007
Location: S.E. Michigan

Karma:

Senior Member

I actually have several sets of "transfers". Some for plain holes in wood - as these are rarely tapped. Another is a box of sharp pointed screws that I seem to misplace regularly. I did have them when I put the new cover on the door, but I didn't have enough for all two dozen screws at once. So I elected to do the top first. And I didn't notice that the plastic had slipped......
So, I drilled all the holes right on the mark only to find that the panel didn't with the screws in place.
That is why you can see the double holes in the top edge.
I'll either cover the panel or make a new one when I have nothing else to do for the house, cars, yard and coach.

Matt

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

[Message index]

		How to measure for accurate hole drilling? By: Michael Bozardt on Sun, 07 May 2017 17:15
		Re: [GMCnet] How to measure for accurate hole drilling? By: Ken Henderson on Sun, 07 May 2017 18:50
		Re: [GMCnet] How to measure for accurate hole drilling? By: Michael Bozardt on Sun, 07 May 2017 23:31
		Re: How to measure for accurate hole drilling? By: 77Royale on Mon, 08 May 2017 07:08
		Re: How to measure for accurate hole drilling? By: Ken Burton on Mon, 08 May 2017 09:31
		Re: How to measure for accurate hole drilling? By: 77Royale on Mon, 08 May 2017 10:20
		Re: [GMCnet] How to measure for accurate hole drilling? By: James Hupy on Mon, 08 May 2017 10:26
		Re: [GMCnet] How to measure for accurate hole drilling? By: Jp Benson on Mon, 08 May 2017 13:47
		Re: [GMCnet] How to measure for accurate hole drilling? By: Ken Burton on Mon, 08 May 2017 15:51
		Re: [GMCnet] How to measure for accurate hole drilling? By: Jp Benson on Mon, 08 May 2017 20:34
		Re: How to measure for accurate hole drilling? By: skip2 on Mon, 08 May 2017 15:52
		Re: How to measure for accurate hole drilling? By: RoadWarrior on Mon, 08 May 2017 16:25
		Re: How to measure for accurate hole drilling? By: Michael Bozardt on Wed, 10 May 2017 09:31
		Re: [GMCnet] How to measure for accurate hole drilling? By: sgltrac on Wed, 10 May 2017 09:41
		Re: How to measure for accurate hole drilling? By: Phantom2 on Mon, 08 May 2017 23:56
		Re: How to measure for accurate hole drilling? By: Matt Colie on Tue, 09 May 2017 07:59
		Re: [GMCnet] How to measure for accurate hole drilling? By: Mike Kelley on Tue, 09 May 2017 08:34
		Re: [GMCnet] How to measure for accurate hole drilling? By: Jp Benson on Tue, 09 May 2017 08:51
		Re: [GMCnet] How to measure for accurate hole drilling? By: Michael Bozardt on Wed, 10 May 2017 09:21
		Re: [GMCnet] How to measure for accurate hole drilling? By: Jp Benson on Wed, 10 May 2017 20:39
		Re: [GMCnet] How to measure for accurate hole drilling? By: Michael Bozardt on Fri, 12 May 2017 10:07
		Re: [GMCnet] How to measure for accurate hole drilling? By: hal kading on Fri, 12 May 2017 14:42
		Re: [GMCnet] How to measure for accurate hole drilling? By: sgltrac on Fri, 12 May 2017 19:22
		Re: [GMCnet] How to measure for accurate hole drilling? By: C Boyd on Fri, 12 May 2017 20:33
		Re: [GMCnet] How to measure for accurate hole drilling? By: Matt Colie on Sat, 13 May 2017 07:59
		Re: [GMCnet] How to measure for accurate hole drilling? By: GMC Cruse on Fri, 12 May 2017 22:58
		Re: [GMCnet] How to measure for accurate hole drilling? By: GMC Cruse on Sat, 13 May 2017 10:32
		Re: How to measure for accurate hole drilling? By: Michael Bozardt on Mon, 29 May 2017 11:26
		Re: [GMCnet] How to measure for accurate hole drilling? By: James Hupy on Mon, 29 May 2017 11:54

Previous Topic:	LPG Regulator
Next Topic:	Finally mounted my Digipanel oil pressure sensor

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Jul 02 07:55:23 CDT 2024

Total time taken to generate the page: 0.00745 seconds