GMCforum: GMCnet » [GMCnet] Setting a base lines for your stock oil/temp gauges.

Home » Public Forums » GMCnet » [GMCnet] Setting a base lines for your stock oil/temp gauges.

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Setting a base lines for your stock oil/temp gauges. [message #317022]

Wed, 03 May 2017 12:46

BobDunahugh

Messages: 2465
Registered: October 2010
Location: Cedar Rapids, IA

Karma:

Senior Member

The stock gauges are fine if you know what they're telling you. Get the engine up to normal operating temps. Use an inferred temp sensor on the engines intake manifold temp sensor. Read the inferred temp. Then you'll know if it's running hot or cold. Take a Sharpie. Put a very small dot on your gauge lens as a reference point. Pull your engine oil pressure sensor. Screw in a pressure gauge. Then mark the oil pressure gauge lens. This way there's no more questing, And no need for more gauges. Bob Dunahugh
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

[Message index]

		[GMCnet] Setting a base lines for your stock oil/temp gauges. By: BobDunahugh on Wed, 03 May 2017 12:46
		Re: [GMCnet] Setting a base lines for your stock oil/temp gauges. By: Matt Colie on Wed, 03 May 2017 13:06

Previous Topic:	Re: [GMCnet] fan clutch mystery/ theory
Next Topic:	Re: [GMCnet] Vonda Walsh - Welcome

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Oct 03 01:30:16 CDT 2024

Total time taken to generate the page: 0.00681 seconds