| Would these fit our GMC's [message #314514] |
Sun, 12 March 2017 16:32  |
Bruce Hart
Messages: 1501
Registered: October 2011
Location: La Grange, Wyoming
Karma: 5
|
Senior Member |
|
|
Saw on E-bay
http://www.ebay.com/itm/182478118391?ul_noapp=true
I asked what the hub bore was and he stated:
New message from: 1970grayvette Top Rated Seller(4,419Red Star)
Just a hair over 4-1/2 inches.
This is a Set of FOUR (4) Alcoa dually wheels (all 4 are #160202), taken from a 1980s or 1990s GM truck- may fit others too. They are 16x6 wheels. The wheels have a few scratches, and they need cleaning. AND ONE WHEEL HAS A WELD REPAIR (see pics) that may require further attention or replacing (see pics). Come as pictured.
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
[Updated on: Sun, 12 March 2017 16:34] Report message to a moderator |
|
|
|
| Re: Would these fit our GMC's [message #314518 is a reply to message #314514] |
Sun, 12 March 2017 16:57  |
Hal StClair
Messages: 971
Registered: March 2013
Location: Rio Rancho NM
Karma: -12
|
Senior Member |
|
|
At $200 each me thinks I'd be going to Jim for new.
Hal
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind, except you happen to be insane."
1977 Royale 101348,
1977 Royale 101586, Diesel powered,
1974 Eagle Bus 45',w/slideout,
Rio Rancho, NM
|
|
|
|
| Re: [GMCnet] Would these fit our GMC's [message #314524 is a reply to message #314518] |
Sun, 12 March 2017 17:22 |
Bruce Hart
Messages: 1501
Registered: October 2011
Location: La Grange, Wyoming
Karma: 5
|
Senior Member |
|
|
Especially when one wheel has been welded???
On Sun, Mar 12, 2017 at 3:57 PM, Hal StClair
wrote:
> At $200 each me thinks I'd be going to Jim for new.
> Hal
> --
> 1977 Royale 101348,
>
> 1977 Royale 101586, Diesel powered,
>
> 1974 Eagle Bus 45',w/slideout
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Bruce Hart
1976 Palm Beach
1977 28' Kingsley
La Grange, Wyoming
|
|
|
|
|
|
| Re: Would these fit our GMC's [message #314530 is a reply to message #314518] |
Sun, 12 March 2017 19:34 |
Carl S.
Messages: 4186
Registered: January 2009
Location: Tucson, AZ.
Karma: 13
|
Senior Member |
|
|
Hal StClair wrote on Sun, 12 March 2017 14:57At $200 each me thinks I'd be going to Jim for new.
Hal
Plus, only two of them would be polished on the side we would see on our GMCs.
Carl Stouffer
'75 ex Palm Beach
Tucson, AZ.
Chuck Aulgur Reaction Arm Disc Brakes, Quadrabags, 3.70 LSD final drive, Lenzi knuckles/hubs, Dodge Truck 16" X 8" front wheels, Rear American Eagles, Solar battery charging. GMCSJ and GMCMI member
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
