GMCforum: GMCnet » Onan remote start

Home » Public Forums » GMCnet » Onan remote start (Kohler->Onan)

Show: Today's Messages :: Polls :: Message Navigator

Onan remote start [message #314275]

Wed, 08 March 2017 10:25

Luvn737s

Messages: 1106
Registered: June 2007

Karma:

Senior Member

I am looking to replace the remote inside genset start switch. I replaced my 4.5 Kw Kohler with a 6.0Kw Onan. The Onan came with a remote start switch and hourmeter, etc. I would prefer not re-wiring the line from the inside of the coach to the genset and just re-use the existing wire. Is this feasible? The switch has start, run and stop functions as well as hourmeter power, but I am unsure of how they correspond to the wiring at the genset end. Any ideas?

Randy
1973 26' Painted Desert
Ahwatukee (Phoenix) AZ

Report message to a moderator

[Message index]

		Onan remote start By: Luvn737s on Wed, 08 March 2017 10:25
		Re: [GMCnet] Onan remote start By: jimk on Wed, 08 March 2017 10:43
		Re: Onan remote start By: A Hamilto on Wed, 08 March 2017 12:00
		Re: Onan remote start By: A Hamilto on Wed, 08 March 2017 12:31
		Re: Onan remote start By: tphipps on Thu, 09 March 2017 09:19
		Re: Onan remote start By: Luvn737s on Thu, 09 March 2017 09:49
		Re: Onan remote start By: A Hamilto on Thu, 09 March 2017 10:01
		Re: Onan remote start By: jhbridges on Thu, 09 March 2017 10:39
		Re: [GMCnet] Onan remote start By: Bruce Hart on Thu, 09 March 2017 14:01
		Re: Onan remote start By: JohnL455 on Thu, 09 March 2017 21:26

Previous Topic:	Picture Window 23'
Next Topic:	Furnace ducting

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Sep 19 21:39:11 CDT 2024

Total time taken to generate the page: 0.02347 seconds