GMCforum: GMCnet » Onan Hydrolocked?

Home » Public Forums » GMCnet » Onan Hydrolocked? (Onan stalled on Sea Foam and won't restart)

Show: Today's Messages :: Polls :: Message Navigator

Onan Hydrolocked? [message #313821]

Sun, 26 February 2017 12:38

Palmerdad

Messages: 60
Registered: August 2016
Location: Traverse City

Karma:

Member

So I was giving the Onan a Sea Foam treatment through the carb and gave it a bit too much of a spurt and it bogged down and stalled and now won't restart. I pulled the plugs and engaged the starter several times. It coughed out some liquid from one of the plug ports but once the plugs were reinstalled it still won't start. Anyone have thoughts on what I should try next? I didn't want to try anything else until I got some different opinions as I don't want to make it worse and I've never dealt with this before.

-James Palmer, Traverse City, MI 1976 Eleganza

Report message to a moderator

[Message index]

		Onan Hydrolocked? By: Palmerdad on Sun, 26 February 2017 12:38
		Re: [GMCnet] Onan Hydrolocked? By: James Hupy on Sun, 26 February 2017 13:01
		Re: Onan Hydrolocked? By: jhbridges on Sun, 26 February 2017 13:18
		Re: Onan Hydrolocked? By: Larry on Sun, 26 February 2017 13:23
		Re: Onan Hydrolocked? By: JohnL455 on Sun, 26 February 2017 15:46
		Re: Onan Hydrolocked? By: JohnL455 on Sun, 26 February 2017 15:52
		Re: Onan Hydrolocked? By: Matt Colie on Sun, 26 February 2017 16:20
		Re: Onan Hydrolocked? By: Palmerdad on Sun, 26 February 2017 17:30
		Re: [GMCnet] Onan Hydrolocked? By: k2gkk on Sun, 26 February 2017 17:46
		Re: Onan Hydrolocked? By: Ken Burton on Sun, 26 February 2017 18:56
		Re: Onan Hydrolocked? By: Palmerdad on Mon, 27 February 2017 19:27
		Re: Onan Hydrolocked? By: jknezek on Tue, 28 February 2017 09:10
		Re: Onan Hydrolocked? By: JohnL455 on Tue, 28 February 2017 09:51
		Re: Onan Hydrolocked? By: jknezek on Tue, 28 February 2017 10:53
		Re: Onan Hydrolocked? By: Palmerdad on Tue, 28 February 2017 11:36
		Re: Onan Hydrolocked? By: Justin Brady on Tue, 28 February 2017 12:22
		Re: Onan Hydrolocked? By: Matt Colie on Tue, 28 February 2017 18:54
		Re: Onan Hydrolocked? By: JohnL455 on Tue, 28 February 2017 21:39

Previous Topic:	idle solenoid
Next Topic:	Removing Side Molding

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Nov 09 10:07:24 CST 2024

Total time taken to generate the page: 0.01143 seconds