Home » Public Forums » GMCnet » Slowing electric wipers
| Slowing electric wipers [message #313791] |
Sat, 25 February 2017 14:05  |
Hal StClair
Messages: 971
Registered: March 2013
Location: Rio Rancho NM
Karma: -12
|
Senior Member |
|
|
I'm in the process of installing a late steering column with the multi function switch so I'm planning to wire Ken's wipers through the new switch. I'd like to employ the bridge diode method Ken discussed in the winter edition of GMC Vintage RVing to slow the speed but think mounting a switch to defeat it would be a good idea. Besides, I'll have an extra hole marked wipers in the dash and mounting a switch there would a great way to clean things up. The article mentioned doing this with a DPST CO switch, I assume would shunt between the bridge input and the high medium leads of the switch, correct? If you're out there Ken, is this what you had in mind?
Thanks for any help.
Hal
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind, except you happen to be insane."
1977 Royale 101348,
1977 Royale 101586, Diesel powered,
1974 Eagle Bus 45',w/slideout,
Rio Rancho, NM
|
|
|
|
| Re: [GMCnet] Slowing electric wipers [message #313838 is a reply to message #313791] |
Sun, 26 February 2017 18:27  |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Hal,
Have you gotten the latest issue of the GMCMI magazine? It has a diagram
of the switch connections:
http://www.gmcmi.com/vintagerving/2017-WinterVintageRving/#p=16
Do you need more than that?
Ken H.
On Sat, Feb 25, 2017 at 3:05 PM, Hal StClair
wrote:
> I'm in the process of installing a late steering column with the multi
> function switch so I'm planning to wire Ken's wipers through the new switch.
> I'd like to employ the bridge diode method Ken discussed in the winter
> edition of GMC Vintage RVing to slow the speed but think mounting a switch
> to
> defeat it would be a good idea. Besides, I'll have an extra hole marked
> wipers in the dash and mounting a switch there would a great way to clean
> things up. The article mentioned doing this with a DPST CO switch, I
> assume would shunt between the bridge input and the high medium leads of the
> switch, correct? If you're out there Ken, is this what you had in mind?
> Thanks for any help.
> Hal
> --
> 1977 Royale 101348,
>
> 1977 Royale 101586, Diesel powered,
>
> 1974 Eagle Bus 45',w/slideout
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
| Re: [GMCnet] Slowing electric wipers [message #313847 is a reply to message #313838] |
Sun, 26 February 2017 20:32 |
Hal StClair
Messages: 971
Registered: March 2013
Location: Rio Rancho NM
Karma: -12
|
Senior Member |
|
|
Got it Ken, I'd just glanced at the diagram and thought the switch depicted the stalk switch. The lights just came on  .
Thanks, Hal
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind, except you happen to be insane."
1977 Royale 101348,
1977 Royale 101586, Diesel powered,
1974 Eagle Bus 45',w/slideout,
Rio Rancho, NM
|
|
|
|
| Re: [GMCnet] Slowing electric wipers [message #313848 is a reply to message #313847] |
Sun, 26 February 2017 21:00 |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
Please let everyone know how it works for you after you've gotten a little
experience with it. I suspect, from comments I've received, that it could
be the answer for a lot of folks.
Ken H.
On Sun, Feb 26, 2017 at 9:32 PM, Hal StClair
wrote:
> Got it Ken, I'd just glanced at the diagram and thought the switch
> depicted the stalk switch. The lights just came on :lol: .
> Thanks, Hal
> --
> 1977 Royale 101348,
>
> 1977 Royale 101586, Diesel powered,
>
> 1974 Eagle Bus 45',w/slideout
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
| Re: [GMCnet] Slowing electric wipers [message #313849 is a reply to message #313848] |
Sun, 26 February 2017 21:23 |
Hal StClair
Messages: 971
Registered: March 2013
Location: Rio Rancho NM
Karma: -12
|
Senior Member |
|
|
Will do Ken, thank you for the information. Your diagram of the wiper motor terminals in your installation instructions helped a bunch. Living in the SW we can go a LONG time before we need to use the wipers though. I've had wiper blades go bad before they had ever being used. But I should be ready I hope...
Hal
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind, except you happen to be insane."
1977 Royale 101348,
1977 Royale 101586, Diesel powered,
1974 Eagle Bus 45',w/slideout,
Rio Rancho, NM
|
|
|
|
| Re: [GMCnet] Slowing electric wipers [message #321527 is a reply to message #313838] |
Wed, 02 August 2017 07:56 |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
ATTENTION ELECTRIC WIPER USERS:
At Shawnee I modified several GMCs with a variation on the electric wiper
slow-down mod. published at:
http://www.gmcmi.com/vintagerving/2017-WinterVintageRving/#p=16
After that publication appeared, it occurred to me that it would be quicker
and easier to insert the bridge rectifier in the Ground lead rather than
the Power lead. Every time I installed the mod., I did it that way. It
being such a simple change that we never tested it.
I've since learned from one owner, and experienced myself, a situation I
didn't anticipate: SOME Lumina wiper motors are grounded not only by the
pigtail's ground wire, but by the motor housing. In that case, the mod.
causes no problem, but it also does nothing to slow the motor.
So, if I, or you, installed the bridge rectifier in the Ground lead and the
wipers still run fast, that's probably the problem. You'll have to move
the rectifier IAW the published diagram.
Sorry 'bout that -- all my shop motors have isolated grounds.
Ken H.
Americus, GA
'76 X-Birchaven w/Cad500/Howell EFI & EBL,
Manny Brakes & 1-Ton, etc., etc., etc.
www.gmcwipersetc.com
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
Goto Forum:
Current Time: Fri Nov 01 05:40:16 CDT 2024
Total time taken to generate the page: 0.00740 seconds
|
GMCforum
Search
Help
Register
Login
Home
