GMCforum: GMCnet » Potential Storage Space Behind Onan in an Early Model 23'

Home » Public Forums » GMCnet » Potential Storage Space Behind Onan in an Early Model 23' (Every Little Bit Helps)

Show: Today's Messages :: Polls :: Message Navigator

Potential Storage Space Behind Onan in an Early Model 23' [message #313788]

Sat, 25 February 2017 12:53

A Hamilto

Messages: 4508
Registered: April 2011

Karma: 39

Senior Member

Here are a couple of pictures of what the Onan compartment looks like from the top with the cover off. Ignore the 2X2, I added it when I was configuring the area for a Palm Beach rear dineete. I don't know if the compartment is OEM or not. There is a plywood partition between the Onan power drawer and the GMC body. Between that partition and the GMC body is a little bit of space that might be useful. The cavity between the Onan power drawer and that partition is for outside air to flow from the door louvers to the Onan intake. It might not need to be that spacious. It wouldn't be hard to remove that partition and install one closer to the power drawer to get a little more storage space.

http://www.gmcmhphotos.com/photos/data/10/medium/Sequoia_Onan_Compartment_2.JPG

http://www.gmcmhphotos.com/photos/data/10/medium/Sequoia_Onan_Compartment_1.JPG

To access the space, cut the plywood top and create an access panel. You would need to install some support at the body for that panel. If you can see the pencil lines in this picture, the one closest to the rear would be the cut mark. If you move the partition towards the Onan, you could make the access panel larger.

http://www.gmcmhphotos.com/photos/data/10/medium/Sequoia_Onan_Compartment_3.JPG

Report message to a moderator

Previous Topic:	[GMCnet] What parts should I take with me in our GMC
Next Topic:	[GMCnet] Plans for new galley

Goto Forum:

-=] Back to Top [=-

Current Time: Thu Jan 16 02:49:56 CST 2025

Total time taken to generate the page: 0.09653 seconds