GMCforum: GMCnet » [GMCnet] Brake hose

Home » Public Forums » GMCnet » [GMCnet] Brake hose

Show: Today's Messages :: Polls :: Message Navigator

[GMCnet] Brake hose [message #313055]

Sat, 11 February 2017 21:50

ron preston

Messages: 46
Registered: November 2016

Karma: 1

Member

Thanks Ken
I probably don't have the 80mm caliper . I bought it from my local
auto parts store (not a chain store)Raybestos FRC4168 i take it 80 mm is
the diameter of the piston.
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Re: [GMCnet] Brake hose [message #313059 is a reply to message #313055]

Sun, 12 February 2017 03:17

Mr ERFisher

Messages: 7117
Registered: August 2005

Karma: 2

Senior Member

Maybe this will help
http://gmcmotorhome.info/brakes.html#80

On Sat, Feb 11, 2017 at 7:51 PM ron preston wrote:

> Thanks Ken
> I probably don't have the 80mm caliper . I bought it from my local
> auto parts store (not a chain store)Raybestos FRC4168 i take it 80 mm is
> the diameter of the piston.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Gene Fisher -- 74-23,77PB/ore/ca
“Give a man a fish; you have fed him for today --- give him a URL and
-------
http://gmcmotorhome.info/
Alternator Protection Cable
http://gmcmotorhome.info/APC.html
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Re: [GMCnet] Brake hose [message #313100 is a reply to message #313059]

Mon, 13 February 2017 00:11

Ken Burton

Messages: 10030
Registered: January 2004
Location: Hebron, Indiana

Karma: 10

Senior Member

To determine if you have the 80 mm. caliper, look at the connection of the brake hose hose to the caliper. If the hose is threaded directly into the caliper, then it is not an 80 mm. caliper. If the hose is held to the caliper with a bolt then it is the 80 mm one.

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

Report message to a moderator

Previous Topic:	Rear brake brum race puller and press tool
Next Topic:	[GMCnet] Who own's this coach

Goto Forum:

-=] Back to Top [=-

Current Time: Wed Nov 13 21:15:04 CST 2024

Total time taken to generate the page: 0.05179 seconds