|
Re: Window treatment [message #311253 is a reply to message #311251] |
Mon, 05 December 2016 07:37 |
jhbridges
Messages: 8412 Registered: May 2011 Location: Braselton ga
Karma: -74
|
Senior Member |
|
|
Mine have fabric covered thin plywood valences. the sides are cut to the wall curve, the outside is flexible enough to follow the curve.
--johnny
Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons.
Braselton, Ga.
I forgive them all, save those who hurt the dogs. They must answer to me in hell
|
|
|
Re: Window treatment [message #311259 is a reply to message #311251] |
Mon, 05 December 2016 08:46 |
lqqkatjon
Messages: 2324 Registered: October 2010 Location: St. Cloud, MN
Karma: 5
|
Senior Member |
|
|
most I have seen, do not really keep the shade curved to the window, the shade is straight, but the valance is cut as a curve to the body, and keeps the shade straight , but tight to the window.
I have seen all sorts, from plywood, to people making them out of PVC rain gutters. Jim Bounds uses some sort of bent plasic and covers them in fabric.
Lots of examples on the photo archive.
Jon Roche
75 palm beach
EBL EFI, manny headers, Micro Level, rebuilt most of coach now.
St. Cloud, MN
http://lqqkatjon.blogspot.com/
[Updated on: Mon, 05 December 2016 08:46] Report message to a moderator
|
|
|
|
|
|
Re: Window treatment [message #311270 is a reply to message #311253] |
Mon, 05 December 2016 12:40 |
Atom Ant
Messages: 170 Registered: October 2016 Location: Austin, TX
Karma: 0
|
Senior Member |
|
|
Johnny Bridges wrote on Mon, 05 December 2016 07:37Mine have fabric covered thin plywood valences. the sides are cut to the wall curve, the outside is flexible enough to follow the curve.
--johnny
best way to make a template for the wall or window curve? This is something I've ALWAYS wondered.
Compass?
(waiting for Matt's reply about boatbuilding before the depression)
1976 Palm Beach
Austin, TX
[Updated on: Mon, 05 December 2016 12:49] Report message to a moderator
|
|
|
|
Re: Window treatment [message #311281 is a reply to message #311280] |
Mon, 05 December 2016 15:24 |
tphipps
Messages: 3005 Registered: August 2004 Location: Spanish Fort, AL
Karma: 9
|
Senior Member |
|
|
Easy way to get a correct curve for valances is to hold a sheet of stiff material up to the door opening and trace the body curve. This is close enough for most designs. I used a closed foam product. Easy to work with. You can control curves with your HF hot air gun.
Tom, MS II
2012 Phoenix Cruiser model 2552
KA4CSG
[Updated on: Mon, 05 December 2016 15:25] Report message to a moderator
|
|
|