GMCforum: GMCnet » OEM copper cv bands

Home » Public Forums » GMCnet » OEM copper cv bands

Show: Today's Messages :: Polls :: Message Navigator

OEM copper cv bands [message #310582]

Fri, 18 November 2016 16:50

C Boyd

Messages: 2629
Registered: April 2006

Karma: 18

Senior Member

How did GM get the oem copper one piece bands on?

C. Boyd
76 Crestmont
East Tennessee

Report message to a moderator

Re: [GMCnet] OEM copper cv bands [message #310585 is a reply to message #310582]

Fri, 18 November 2016 19:03

emerystora

Messages: 4442
Registered: January 2004

Karma: 13

Senior Member

I don’t remember exactly how but if I recall they had a loose fitting copper band and then ekectrucakkt induced a current into it which caused it to shrink tightly around the boot.
Does anyone know where this might be written up?

Emery Stora
77 Kingsley
Frederick, CO

> On Nov 18, 2016, at 3:50 PM, Charles Boyd wrote:
>
> How did GM get the oem copper one piece bands on?
> --
> C. Boyd
> 76 Crestmont
> East Tennessee
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Report message to a moderator

Re: OEM copper cv bands [message #310595 is a reply to message #310582]

Sat, 19 November 2016 07:14

Matt Colie

Messages: 8547
Registered: March 2007
Location: S.E. Michigan

Karma: 7

Senior Member

Chuck,

It was about this time that I saw a demonstration of both an electo-magnetic process and a mechanical process for doing this kind of thing. I believe I heard the EM people telling others that they had sold some to GM.

Matt

Matt & Mary Colie - Chaumière -'73 Glacier 23 - Members GMCMI, GMCGL, GMCES
Electronically Controlled Quiet Engine Cooling Fan with OE Rear Drum Brakes with Applied Control Arms
SE Michigan - Near DTW - Twixt A2 and Detroit

Report message to a moderator

Re: [GMCnet] OEM copper cv bands [message #310664 is a reply to message #310582]

Sun, 20 November 2016 14:14

Ken Henderson

Messages: 8726
Registered: March 2004
Location: Americus, GA

Karma: 9

Senior Member

Chuck,

IIRC, this is how they did it:

https://en.wikipedia.org/wiki/Electromagnetic_forming

Ken H.

On Fri, Nov 18, 2016 at 5:50 PM, Charles Boyd
wrote:

> How did GM get the oem copper one piece bands on?
> --
> C. Boyd
> 76 Crestmont
> East Tennessee
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach

Report message to a moderator

Re: OEM copper cv bands [message #310667 is a reply to message #310582]

Sun, 20 November 2016 14:37

jhbridges

Messages: 8412
Registered: May 2011
Location: Braselton ga

Karma: -74

Senior Member

That doesn't look like something I can do on the RV pad in the yard. Wrap-Lok is gonna be the move.

--johnny

Foolish Carriage, 76 26' Eleganza(?) with beaucoup mods and add - ons. Braselton, Ga. I forgive them all, save those who hurt the dogs. They must answer to me in hell

Report message to a moderator

Re: [GMCnet] OEM copper cv bands [message #310672 is a reply to message #310667]

Sun, 20 November 2016 15:09

Ken Henderson

Messages: 8726
Registered: March 2004
Location: Americus, GA

Karma: 9

Senior Member

What you want to use is Band-It straps (5422K53) and buckles (5422K53).
Those are too-large quantities (which I've bought a couple of times), but
the pre-assembled versions should be available at NAPA.

The tool can be as cheap as this:
http://www.oreillyauto.com/site/c/detail/LIS0/30950/N0718.oap?ck=Search_N0718_-1_-1&pt=N0718&ppt=C0374

Ken H.

On Sun, Nov 20, 2016 at 3:37 PM, Johnny Bridges via Gmclist <
gmclist@list.gmcnet.org> wrote:
>
> That doesn't look like something I can do on the RV pad in the yard.
Wrap-Lok is gonna be the move.
>
> --johnny
> --
> '76 23' transmode Norris upfit, 76 26' Eleganza(?) with beaucoup mods and
add - ons.
> Braselton, Ga.
>
> "Sometimes I wonder what tomorrow's gonna bring when I think about my
dirty life and times" --Warren Zevon
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach

Report message to a moderator

Re: [GMCnet] OEM copper cv bands [message #310674 is a reply to message #310672]

Sun, 20 November 2016 15:46

Bruce Hart

Messages: 1500
Registered: October 2011
Location: La Grange, Wyoming

Karma: 5

Senior Member

NAPA Clamp #s
UJ-3415 Small clamp
UJ-3416 Large clamp

On Sun, Nov 20, 2016 at 2:09 PM, Ken Henderson
wrote:

> What you want to use is Band-It straps (5422K53) and buckles (5422K53).
> Those are too-large quantities (which I've bought a couple of times), but
> the pre-assembled versions should be available at NAPA.
>
> The tool can be as cheap as this:
> http://www.oreillyauto.com/site/c/detail/LIS0/30950/
> N0718.oap?ck=Search_N0718_-1_-1&pt=N0718&ppt=C0374
>
> Ken H.
>
>
> On Sun, Nov 20, 2016 at 3:37 PM, Johnny Bridges via Gmclist gmclist@list.gmcnet.org> wrote:
>>
>> That doesn't look like something I can do on the RV pad in the yard.
> Wrap-Lok is gonna be the move.
>>
>> --johnny
>> --
>> '76 23' transmode Norris upfit, 76 26' Eleganza(?) with beaucoup mods and
> add - ons.
>> Braselton, Ga.
>>
>> "Sometimes I wonder what tomorrow's gonna bring when I think about my
> dirty life and times" --Warren Zevon
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Bruce Hart
1976 Palm Beach
Milliken, Co
GMC=Got More Class
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Bruce Hart 1976 Palm Beach 1977 28' Kingsley La Grange, Wyoming

Report message to a moderator

Re: OEM copper cv bands [message #310678 is a reply to message #310582]

Sun, 20 November 2016 17:22

C Boyd

Messages: 2629
Registered: April 2006

Karma: 18

Senior Member

Thank you gentlemen. That was something i have wondered about and couldn't figure it out.

C. Boyd
76 Crestmont
East Tennessee

Report message to a moderator

Re: [GMCnet] OEM copper cv bands [message #310686 is a reply to message #310672]

Sun, 20 November 2016 19:23

bdub

Messages: 1578
Registered: February 2004
Location: Central Texas

Karma: 5

Senior Member

Buckles are 5422K67

bdub

-----Original Message-----
From: Gmclist On Behalf Of Ken Henderson
Sent: Sunday, November 20, 2016 3:10 PM

What you want to use is Band-It straps (5422K53) and buckles (5422K53).
Those are too-large quantities (which I've bought a couple of times), but the
pre-assembled versions should be available at NAPA.

_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

bdub
'76 Palm Beach/Central Texas
www.bdub.net
www.gmcmhphotos.com
www.gmcmotorhomemarketplace.com
www.gmcmhregistry.com
www.facebook.com/groups/classicgmcmotorhomes
www.facebook.com/groups/gmcmm

Report message to a moderator

Previous Topic:	[GMCnet] Cruise Transducer
Next Topic:	Electrical gremlins, charging set up, and questions

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Jun 30 21:19:26 CDT 2024

Total time taken to generate the page: 0.17067 seconds