GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » New wood floor in my Royale (or, how to work really, really hard for five days)
New wood floor in my Royale [message #308100] Sat, 01 October 2016 16:51 Go to previous message
habbyguy is currently offline  habbyguy   United States
Messages: 896
Registered: May 2012
Location: Mesa, AZ
Karma:
Senior Member
All, I wanted to share some photos of my recent renovations to my '78 Royale Center Kitchen. Ever since I bought it, I was a little put off by the green(ish) shag carpeting. It had been replaced once (in the 80's, I think) but was really past its expiration date. I decided to go with an engineered wood floor (leftovers from my upstairs home renovation). I used Mohawk "Fashion Gray" engineered wood flooring - basically a hand-scraped hickory veneer on a manufactured (plywood) tongue-and-groove base that's a lot more stable than a solid wood floor, which is important for the floor in an RV. I used "Level Step" underlayment that looks like 3mm neoprene with a vapor barrier, and used two layers under the indoor/outdoor carpet I used in the cockpit (for sound deadening - worked like a champ), and for trimming the dinette bases. I replaced the toilet while I was tearing things up, and in the end the coach FINALLY looks like I pictured it when I bought it (looking past the green shag carpet)

I have been beating my head bloody trying to get the photos in order and in a workable album, but no matter what I do, they read from "finished to starting". Oh well - just scroll from the end result through the job to the horrible first photo that looks like one of those abandoned coaches you see on craigslist.

http://www.gmcmhphotos.com/photos/wood-floor-install-2778-royale-center-kitchen/p61456-img-20160921-1118245441.html


Mark Hickey Mesa, AZ 1978 Royale Center Kitchen
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] GMCMI Fall 2016 Convention is 160 Strong!
Next Topic: [GMCnet] Trans vent
Goto Forum:
  


Current Time: Tue Nov 05 04:29:32 CST 2024

Total time taken to generate the page: 0.01238 seconds