GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Power Steering Pulley Out of Alignment?
Power Steering Pulley Out of Alignment? [message #307708] Fri, 23 September 2016 15:48 Go to previous message
thainglo is currently offline  thainglo   United States
Messages: 132
Registered: March 2015
Location: Iowa
Karma:
Senior Member
I've been away from the GMC for awhile but started it up today to take a quick ride around the block and make sure all systems were go. Heard a different kind of noise from the engine bay, so popped open the cover. Was reminded while looking at the front accessories that I was unable to get my power steering pulley back into full alignment after I changed the water pump (along with the aluminum radiator). I took a 20-sec video of it running and shutdown, would greatly appreciate anyone's thoughts.

https://youtu.be/f_fVjJZWHfU

The problem I remember having was the tightening of the belt for both the power steering and alternator would cause the bracket holding the power steering reservoir to start to tip in. The attachment bolts for the bracket were inboard of the pulley, nothing on the outside to keep it in place. I snapped a pic of the outer side of the bracket in hopes that could shed light.


http://www.gmcmhphotos.com/photos/uploads/42258/2016-09-23_15_15_15.jpg


Any guidance? I can see the alternator belt is twisted a little as it heads from the power steering pulley up to the alternator and I'm fairly certain that couldn't be good for long term survival.


Matt Sladek 1976 Eleganza II Coralville, IA
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: OEM Cruise Control Acting Strangely
Next Topic: Buzz box replacement
Goto Forum:
  


Current Time: Thu Nov 07 12:46:13 CST 2024

Total time taken to generate the page: 0.00563 seconds