GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » [GMCnet] Newly installed VIAIR 400C compressor
[GMCnet] Newly installed VIAIR 400C compressor [message #306726] Thu, 08 September 2016 15:28 Go to previous message
glwgmc is currently offline  glwgmc   United States
Messages: 1014
Registered: June 2004
Karma:
Senior Member
Ok, I give! I would still rewire if it was mine, but others are certainly free to do as they wish. I still see too many potential failure points with this set up and no upside to doing it this way except for convenience at the moment. So, off I go into the EE sunset…….(grin)

Jerry
Jerry Work
The Dovetail Joint
Fine furniture designed and hand crafted in the 1907 former Masonic Temple building in historic Kerby, OR

glwork@mac.com
http://jerrywork.com

==============
Message: 11
Date: Thu, 08 Sep 2016 12:39:53 -0600
From: A.
To: gmclist@list.gmcnet.org
Subject: Re: [GMCnet] Newly installed VIAIR 400C compressor
Message-ID:
Content-Type: text/plain; charset="utf-8"

glwgmc wrote on Thu, 08 September 2016 11:29
> Others will likely chime in here, but you need to rethink your wiring. Electricity will follow the path of least resistance and will not simply
> send 1/3rd of the amps down each of your three small wires. All 19 amps are going to go down one of those three until it burns up. My suggestion
> would be to replace your three 18ga wires with one proper 10ga wire as soon as you can.
>
> Jerry
> Jerry Work
Is that your final answer, or do you want to guess again? You would be right ONLY if there was a BIG difference in the resistance among the wires.
Same gauge, same length, will divide nearly exactly into thirds.

If one wire has half the resistance as the each of the other two, it will still carry only half of the load, and the other two will each carry a
quarter.

My EE degree might be 40 years old, but they haven't redesigned electricity since then.
--
73 23' Sequoia 4 Sale
73 23' CanyonLands Parts Unit 4 Sale
Upper Alabama
"Highest price does not guarantee highest quality.”
===============






_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org


Jerry & Sharon Work
78 Royale
Kerby, OR
 
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Don't miss the GMCMI Fall Convention in Mansfield, Ohio!
Next Topic: [GMCnet] tire monitoring system
Goto Forum:
  


Current Time: Wed Nov 06 07:27:15 CST 2024

Total time taken to generate the page: 0.01024 seconds