| RVQ [message #306566] |
Mon, 05 September 2016 18:42  |
JohnL455
Messages: 4447
Registered: October 2006
Location: Woodstock, IL
Karma: 12
|
Senior Member |
|
|
I bought an RVQ from a member here years ago ( I forget the name) and finally got the Extend-a-stay installed. Is there any easy way to do a bumper hanger without drilling I was going to mount the rail to 2x2 aluminum angle which I will double stack to create a U channel. Then line the inside with adhesive female Velcro so as not to scratch the chrome. I also have the hose to connect to the coach and the quick disconnect hose to go at the RVQ but these are on different hoses. Can I simple cut and joint the two with M to M brass barb connector and clamps or is that not safe?
John Lebetski
Woodstock, IL
77 Eleganza II
|
|
|
|
| Re: RVQ [message #306579 is a reply to message #306566] |
Mon, 05 September 2016 21:55  |
Dennis S
Messages: 3046
Registered: November 2005
Karma: 2
|
Senior Member |
|
|
John
I believe Steve Ferguson organized a group buy for the Rvq. In the archives I see he mounted his on the rear ladder but I can't find any pictures on the photo site. John Heslinga has a couple of photos on hose disconnects used with bbq and Dennis Sch has a photo album for a rear mount.
Dennis
JohnL455 wrote on Mon, 05 September 2016 18:42I bought an RVQ from a member here years ago ( I forget the name) and finally got the Extend-a-stay installed. Is there any easy way to do a bumper hanger without drilling I was going to mount the rail to 2x2 aluminum angle which I will double stack to create a U channel. Then line the inside with adhesive female Velcro so as not to scratch the chrome. I also have the hose to connect to the coach and the quick disconnect hose to go at the RVQ but these are on different hoses. Can I simple cut and joint the two with M to M brass barb connector and clamps or is that not safe?
Dennis S
73 Painted Desert 230
Memphis TN Metro
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
