Body mounts [message #306461] |
Sat, 03 September 2016 16:21 |
jimtze
Messages: 92 Registered: June 2011 Location: Victoria, BC
Karma:
|
Member |
|
|
I'm in the middle of changing the body pads. Have the forward and rear rectangular pads out and in. Middle ones still to do. I have the round body bushing mounts in place. My concern is that the front mounts may be slightly off to the rear and the new bolts will not line up and go in. Has anyone had a problem with this?
I did discover that you have to watch that the ground wire on the front right side does not slip out from under the spacer block.
Jim Bratvold
Victoria, BC
76 Eleganza ll
|
|
|