GMCforum: GMCnet » Need Alcoa Classic metal valve stems

Home » Public Forums » GMCnet » Need Alcoa Classic metal valve stems ( Where to buy? )

Show: Today's Messages :: Polls :: Message Navigator

Need Alcoa Classic metal valve stems [message #303467]

Tue, 12 July 2016 13:32

JohnL455

Messages: 4447
Registered: October 2006
Location: Woodstock, IL

Karma:

Senior Member

Looking to get new tires so need new Alcoa all steel valve stems. Struck out at Applied and Southwest Wheel. These are the straight ones with hex nuts and metal cap for 80 PSI for Classics.

John Lebetski
Woodstock, IL
77 Eleganza II

Report message to a moderator

[Message index]

		Need Alcoa Classic metal valve stems By: JohnL455 on Tue, 12 July 2016 13:32
		Re: [GMCnet] Need Alcoa Classic metal valve stems By: powerjon on Tue, 12 July 2016 14:26
		Re: [GMCnet] Need Alcoa Classic metal valve stems By: George Zhookoff on Tue, 12 July 2016 14:36
		Re: [GMCnet] Need Alcoa Classic metal valve stems By: powerjon on Tue, 12 July 2016 14:36
		Re: Need Alcoa Classic metal valve stems By: JohnL455 on Tue, 12 July 2016 15:13
		Re: [GMCnet] Need Alcoa Classic metal valve stems By: emerystora on Tue, 12 July 2016 15:19
		Re: [GMCnet] Need Alcoa Classic metal valve stems By: Kingsley Coach on Tue, 12 July 2016 17:47
		Re: [GMCnet] Need Alcoa Classic metal valve stems By: jimk on Tue, 12 July 2016 18:50
		Re: Need Alcoa Classic metal valve stems By: JohnL455 on Tue, 12 July 2016 18:15
		Re: Need Alcoa Classic metal valve stems By: JohnL455 on Tue, 12 July 2016 19:55
		Re: [GMCnet] Need Alcoa Classic metal valve stems By: USAussie on Wed, 13 July 2016 10:40
		Re: Need Alcoa Classic metal valve stems By: JohnL455 on Wed, 13 July 2016 11:54
		Re: Need Alcoa Classic metal valve stems By: JohnL455 on Wed, 13 July 2016 16:14
		Re: Need Alcoa Classic metal valve stems By: Bob de Kruyff on Fri, 15 July 2016 15:31
		Re: Need Alcoa Classic metal valve stems By: JohnL455 on Sat, 16 July 2016 08:56

Previous Topic:	[GMCnet] blown fuses: alternator saga, continues...
Next Topic:	Front interior Redo

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Sep 23 07:19:19 CDT 2024

Total time taken to generate the page: 0.02416 seconds