GMCforum: GMCnet » troubleshooting horn-directional signal switch connector?

Home » Public Forums » GMCnet » troubleshooting horn-directional signal switch connector?

Show: Today's Messages :: Polls :: Message Navigator

troubleshooting horn-directional signal switch connector? [message #303263]

Fri, 08 July 2016 10:12

pzerkel

Messages: 212
Registered: September 2007
Location: Salisbury, IL

Karma: 0

Senior Member

I am attempting to troubleshoot my inop horn(s). Looking at page 12-30 of X-7525. Several steps mention this "directional signal switch connector". But I cannot find any photos or descriptions of exactly where that thing is at.

Is it in/near column or somewhere inside the front access doors?

Thanks

Paul Zerkel
'78 Eleganza II
Salisbury IL (near Springfield)

Report message to a moderator

Re: troubleshooting horn-directional signal switch connector? [message #303266 is a reply to message #303263]

Fri, 08 July 2016 11:27

Ken Burton

Messages: 10030
Registered: January 2004
Location: Hebron, Indiana

Karma: 10

Senior Member

If is a flat multi-pin connector located on the lower steering column. I do not remember the exact number of pins but it is probably around 20 t0 25 flat pins all in one line.

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

Report message to a moderator

Previous Topic:	Carb Stud retainer part for Cruise Control chain
Next Topic:	[GMCnet] RE. Old Subject AGAIN......Fan Clutchs

Goto Forum:

-=] Back to Top [=-

Current Time: Sat Nov 16 12:34:49 CST 2024

Total time taken to generate the page: 0.00778 seconds