| Carb Stud retainer part for Cruise Control chain [message #303205] |
Thu, 07 July 2016 08:06  |
77Royale
Messages: 461
Registered: June 2014
Location: Mid Michigan
Karma:
|
Senior Member |
|
|
I have a rebuilt carb from Dick P. The existing cruise control chain has a black plastic "cap" which used to sit securely on a ball stud on my old carb. Now the new one from Dick has a different post with a slot in it for presumably a clip to hold the chain on. Can anyone tell me where I can pick up a proper cap which will allow me to put the chain back on the carb and not have it slide off. I just dont know the proper term for it to start looking. I should add that the existing stud in the Patterson carb is not the screw in type so I can just get a new ball stud and hook it back up. Im looking for a part that will tie the cruise chain to the linkage.
Many thanks
77 Royale, Rear Dry Bath. 403, 3.55 Final Drive, Lenzi goodies, Patterson carb and dizzy.
Mid Michigan
[Updated on: Thu, 07 July 2016 08:32] Report message to a moderator |
|
|
|
GMCforum
Search
Help
Register
Login
Home
