GMCforum: GMCnet » Sealing clearance lights without removing them

Home » Public Forums » GMCnet » Sealing clearance lights without removing them

Show: Today's Messages :: Polls :: Message Navigator

Sealing clearance lights without removing them [message #302930]

Fri, 01 July 2016 17:22

RF_Burns

Messages: 2277
Registered: June 2008
Location: S. Ontario, Canada

Karma:

Senior Member

A PO had installed large Grote 4533 clearance lights front and back on the Murray. I suspect several are leaking front and back.

http://www.grote.com/products/45333-deluxe-die-cast-cab-marker-lamp-yellow/

It appears there are nuts on the mounting screws above the headliner. The headliner is riveted in place front and back. Anyone have any idea how I could seal them front the outside?

Just wondering.

Bruce Hislop
ON Canada
77PB, 455 Dick P. rebuilt, DynamicEFI EBL EFI & ESC.
1 ton front end
http://www.gmcmhphotos.com/photos/showphoto.php?photo=29001
My Staff says I never listen to them, or something like that

Report message to a moderator

[Message index]

		Sealing clearance lights without removing them By: RF_Burns on Fri, 01 July 2016 17:22
		Re: Sealing clearance lights without removing them By: A Hamilto on Fri, 01 July 2016 21:58

Previous Topic:	[GMCnet] Dura Cool Available in Europe
Next Topic:	Alure Vinyl plank click flooring advice please

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Nov 18 18:23:08 CST 2024

Total time taken to generate the page: 0.01380 seconds