GMCforum: GMCnet » New aluminum intake manifold, anything to watch out for?

Home » Public Forums » GMCnet » New aluminum intake manifold, anything to watch out for?

Show: Today's Messages :: Polls :: Message Navigator

New aluminum intake manifold, anything to watch out for? [message #302774]

Tue, 28 June 2016 14:41

lw8000

Messages: 201
Registered: July 2012
Location: S.E. Michigan

Karma:

Senior Member

As I mentioned in another post we recently found our original intake manifold on our 403 has the crack starting and is about halfway through. Based on what I read here, it appears the only options for a new intake are aluminum, made by Rockwell and Edelbrock. I called Cinnabar today and they have the Edelbrock aluminum manifold and include the "turkey tray" with it as well. They mentioned it is raised about 3/8" above where the OEM one is so I will have to check to make sure we are good (they mentioned that it should be OK as long as the body pads are in good shape).

Going with aluminum, is there any downside or anything to watch out for? Are the aluminum ones less prone to crack like the original? I thought I had read once the green ethylene glycol antifreeze could potentially eat away aluminum but is that really an issue? Any other plusses or minuses? Maybe we're stuck going with this as I'm guessing finding a cast iron manifold means going with a used one... and I'd rather do this once and do it right and not have to worry about it ever again.

Thanks much, in advance....,
--
Chris

Chris S. - 77 Kingsley, 3.70 FD, mostly OEM - S.E. Michigan

Report message to a moderator

[Message index]

		New aluminum intake manifold, anything to watch out for? By: lw8000 on Tue, 28 June 2016 14:41
		Re: [GMCnet] New aluminum intake manifold, anything to watch out for? By: Keith V on Tue, 28 June 2016 15:01
		Re: [GMCnet] New aluminum intake manifold, anything to watch out for? By: James Hupy on Tue, 28 June 2016 15:39
		Re: New aluminum intake manifold, anything to watch out for? By: lqqkatjon on Tue, 28 June 2016 15:18
		Re: New aluminum intake manifold, anything to watch out for? By: Chris Tyler on Tue, 28 June 2016 15:32
		Re: New aluminum intake manifold, anything to watch out for? By: C Boyd on Tue, 28 June 2016 15:41
		Re: [GMCnet] New aluminum intake manifold, anything to watch out for? By: Keith V on Tue, 28 June 2016 15:49
		Re: [GMCnet] New aluminum intake manifold, anything to watch out for? By: USAussie on Tue, 28 June 2016 17:00
		Re: [GMCnet] New aluminum intake manifold, anything to watch out for? By: powerjon on Tue, 28 June 2016 19:11
		Re: New aluminum intake manifold, anything to watch out for? By: A Hamilto on Tue, 28 June 2016 17:08
		Re: New aluminum intake manifold, anything to watch out for? By: A Hamilto on Tue, 28 June 2016 17:10
		Re: [GMCnet] New aluminum intake manifold, anything to watch out for? By: USAussie on Tue, 28 June 2016 17:20
		Re: [GMCnet] New aluminum intake manifold, anything to watch out for? By: USAussie on Tue, 28 June 2016 17:20
		Re: New aluminum intake manifold, anything to watch out for? By: lw8000 on Tue, 28 June 2016 19:40
		Re: [GMCnet] New aluminum intake manifold, anything to watch out for? By: jimk on Tue, 28 June 2016 22:11
		Re: [GMCnet] New aluminum intake manifold, anything to watch out for? By: lw8000 on Wed, 29 June 2016 07:53
		Re: [GMCnet] New aluminum intake manifold, anything to watch out for? By: James Hupy on Wed, 29 June 2016 08:14
		Re: [GMCnet] New aluminum intake manifold, anything to watch out for? By: jimk on Wed, 29 June 2016 08:56
		Re: New aluminum intake manifold, anything to watch out for? By: kerry pinkerton on Tue, 28 June 2016 21:47
		Re: New aluminum intake manifold, anything to watch out for? By: kerry pinkerton on Tue, 28 June 2016 21:48

Previous Topic:	Onan Flywheel Alternator Question
Next Topic:	Rear fuel tank

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Nov 17 05:42:28 CST 2024

Total time taken to generate the page: 0.00769 seconds