GMCforum: GMCnet » 6000 KW generator removal

Home » Public Forums » GMCnet » 6000 KW generator removal (How to remove generator)

Show: Today's Messages :: Polls :: Message Navigator

6000 KW generator removal [message #301719]

Mon, 06 June 2016 19:47

Glover, Brian K.

Messages: 87
Registered: October 2015
Location: Griffin Georgia

Karma:

Member

I was looking over the generator compartment and found above the generator there is a foam type padding ( guess it is original must be some kind of heat shield material ) It's falling apart and looks kind of burnt / melted.
I need to pull it out and replace it with some kind of heat shield material ?
But my bigger question / help / direction is pulling the generator ? I Have to pull it to get to and replace heat shield, so any direction would really be appreciated !?

Thanks in advance .

Brian

Brian G. Griffin Ga. 1978 Eleganza II TZE168V101637

Report message to a moderator

[Message index]

		6000 KW generator removal By: Glover, Brian K. on Mon, 06 June 2016 19:47
		Re: 6000 KW generator removal By: Carl S. on Mon, 06 June 2016 20:17
		Re: 6000 KW generator removal By: JohnL455 on Mon, 06 June 2016 20:29
		Re: 6000 KW generator removal By: wally on Mon, 06 June 2016 20:30
		Re: 6000 KW generator removal By: JohnL455 on Mon, 06 June 2016 20:33
		Re: [GMCnet] 6000 KW generator removal By: Jim Miller on Mon, 06 June 2016 21:10
		Re: [GMCnet] 6000 KW generator removal By: Ken Henderson on Mon, 06 June 2016 21:33
		Re: [GMCnet] 6000 KW generator removal By: Jim Miller on Mon, 06 June 2016 21:55
		Re: [GMCnet] 6000 KW generator removal By: Ken Henderson on Mon, 06 June 2016 22:07
		Re: [GMCnet] 6000 KW generator removal By: Carl S. on Mon, 06 June 2016 21:50
		Re: [GMCnet] 6000 KW generator removal By: emerystora on Tue, 07 June 2016 10:30
		Re: [GMCnet] 6000 KW generator removal By: Jim Miller on Tue, 07 June 2016 21:22
		Re: [GMCnet] 6000 KW generator removal By: jimk on Tue, 07 June 2016 23:53
		Re: [GMCnet] 6000 KW generator removal By: bdub on Wed, 08 June 2016 08:39
		Re: 6000 KW generator removal By: jhbridges on Tue, 07 June 2016 10:48
		Re: 6000 KW generator removal By: Ernest Dankert on Tue, 07 June 2016 15:52
		Re: 6000 KW generator removal By: Glover, Brian K. on Wed, 08 June 2016 15:23

Previous Topic:	[GMCnet] Restoration.Can't bring myself to drive the 3:07 final drive to Branson.
Next Topic:	Comments on GMC I'm Considering

Goto Forum:

-=] Back to Top [=-

Current Time: Tue Nov 19 08:28:38 CST 2024

Total time taken to generate the page: 0.02248 seconds