GMCforum: GMCnet » Bodywork issue

Home » Public Forums » GMCnet » Bodywork issue (Gap between upper panel and rear cap)

Show: Today's Messages :: Polls :: Message Navigator

Bodywork issue [message #301235]

Sat, 28 May 2016 15:42

leejerryj

Messages: 13
Registered: May 2005
Location: Chula Vista, California

Karma:

Junior Member

I'm looking at a 78 Kingsley for purchase and it has an odd problem on the body. On the driver's side, above the belt line, very close to the fresh water fill port, the upper panel is pulling away from the rear cap right at the vertical seam. There doesn't appear to be any other damage as if something external pulled at the seam and created the gap.

Has anyone else ever seem this type of issue? Does it seem expensive to fix? I wish I had pictures to show. Hopefully from my description you can get an idea of the defect.

Thanks in advance!

Jerry Lee
Chula Vista, CA

Report message to a moderator

[Message index]

		Bodywork issue By: leejerryj on Sat, 28 May 2016 15:42
		Re: Bodywork issue By: Adrien G. on Sat, 28 May 2016 22:56
		Re: Bodywork issue By: leejerryj on Sun, 29 May 2016 21:56

Previous Topic:	[GMCnet] Hooking up new furnace (CORRECTION)
Next Topic:	[GMCnet] Dairy Queen Commercial GMC Siting

Goto Forum:

-=] Back to Top [=-

Current Time: Sun Sep 29 07:33:28 CDT 2024

Total time taken to generate the page: 0.02019 seconds