| Cutting board sink cover suppliers [message #300983] |
Sun, 22 May 2016 15:55  |
Scott Nutter
Messages: 782
Registered: January 2015
Location: Houston/San Diego
Karma: 4
|
Senior Member |
|
|
At one time I thought I saw on the GMC vendors list a company that made new sink covers for our kitchen sinks. now I can't find it.
Does anyone know who might make these now?
Worse case senecio is I could make one myself. But it might look like hell and I might cut off a finger, or something much worse.......thanks, Scott
Scott Nutter
1978 Royale Center Kitchen, Patterson 455, switch pitch tranny, 3.21 final drive, Quad bags, Dave Lenzi super duty mid axle disc brakes, tankless water heater, everything Lenzi. Alex Ferrera installed MSD Atomic EFI
Houston, Texas
|
|
|
|
|
|
|
|
| Re: [GMCnet] Cutting board sink cover suppliers [message #300990 is a reply to message #300986] |
Sun, 22 May 2016 16:57  |
Ken Henderson
Messages: 8726
Registered: March 2004
Location: Americus, GA
Karma: 9
|
Senior Member |
|
|
I bought one of George's sink covers at GMCMI Rapid City. Very nice
craftsmanship. One of the glue joints did separate for some reason, but a
little Weldwood and a couple of bar clamps overnight fixed that invisibly.
Ken H.
On Sun, May 22, 2016 at 5:27 PM, gene Fisher wrote:
> Read here. George makes them
> http://gmcwsproducts.blogspot.com
>
>
> On Sunday, May 22, 2016, Scott Nutter wrote:
>
>> At one time I thought I saw on the GMC vendors list a company that made
>> new sink covers for our kitchen sinks. now I can't find it.
>> Does anyone know who might make these now?
>> Worse case senecio is I could make one myself. But it might look like
> hell
>> and I might cut off a finger, or something much worse.......thanks, Scott
>> --
>
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Ken Henderson
Americus, GA
www.gmcwipersetc.com
Large Wiring Diagrams
76 X-Birchaven
76 X-Palm Beach
|
|
|
|
| Re: Cutting board sink cover suppliers [message #300992 is a reply to message #300983] |
Sun, 22 May 2016 18:24 |
Scott Nutter
Messages: 782
Registered: January 2015
Location: Houston/San Diego
Karma: 4
|
Senior Member |
|
|
Thanks fellas.
I have a call into George.
Scott
Scott Nutter
1978 Royale Center Kitchen, Patterson 455, switch pitch tranny, 3.21 final drive, Quad bags, Dave Lenzi super duty mid axle disc brakes, tankless water heater, everything Lenzi. Alex Ferrera installed MSD Atomic EFI
Houston, Texas
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
