| RH Halfshaft Support bearing bolts loose [message #300759] |
Wed, 18 May 2016 14:31  |
JohnL455
Messages: 4447
Registered: October 2006
Location: Woodstock, IL
Karma:
|
Senior Member |
|
|
While doing PM I noticed the 3 support bearing bolts were each a good turn loose. Used a 1/2 socket on 3/8 ratchet on lower 2 but could only get fair access to the top one with a gear wrench or open end. Any special tool combo to get better results? Also is there any point while the plate is loose to try to inject grease with a needle setup? Not sure it would get into the bearing at all.
John Lebetski
Woodstock, IL
77 Eleganza II
|
|
|
|
GMCforum
Search
Help
Register
Login
Home
