[GMCnet] Restoration. Keeping your generator wires safe, and functioning. [message #300401] |
Tue, 10 May 2016 01:31 |
BobDunahugh
Messages: 2465 Registered: October 2010 Location: Cedar Rapids, IA
Karma:
|
Senior Member |
|
|
I had to remove photos to post here. If you're interested in the photos. Let me know. Bob Dunahugh
There are 4 wires that run from your interior remote start switch. To the generator. They're red, white, blue, and green. These wires connect to 4 white wires that come out of the generator. These white wires are labeled with black lettering on these wires. That lettering is very small, and hard to read. There are 4 scotchlok wire connectors that connect these wires in what I consider to be a hazardous area under the generator. These wires then lay in the main coach frame C channel on the left side. As they go to the interior start switch. The first photo shows the black channel of the frame with the protective plastic tubing that hole the wires from the two holding tanks. And one for the 4 generator wires. ( the large black wire is a battery cable ) Photo 2 is a 4 pin connector with waterproof shrink tube wire connectors installed. 3, and 5 show all connections completed. 4 show the original scotchlok connectors. The green tubing is fairly simple to install. And if you're replacing your rubber gas hoses. That makes both task simpler to do.Bob Dunahugh Proud member of GMCMI78 RoyaleE-mail Yenko108@hotmail.com
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|