Home » Public Forums » GMCnet » [GMCnet] Interior Vinyl Trim around Windows
| [GMCnet] Interior Vinyl Trim around Windows [message #300373] |
Mon, 09 May 2016 18:58  |
Dolph Santorine
Messages: 1236
Registered: April 2011
Location: Wheeling, WV
Karma: -41
|
Senior Member |
|
|
What’s a good source for the vinyl trim around the windows?
The parts coach came with a box of stuff that seems about right, but the tine that goes into the aluminum channel is too wide.
Thanks!
Dolph
DE N8JPC
Wheeling, West Virginia
1977 26’ ex-PalmBeach
1-Ton, Sullybilt Bags, Reaction Arms, 3.70 LSD, Manny Transmission, EV-6010
“The Aluminum and Fiberglass Mistress"
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
|
|
| Re: [GMCnet] Interior Vinyl Trim around Windows [message #300388 is a reply to message #300381] |
Mon, 09 May 2016 20:41  |
Dolph Santorine
Messages: 1236
Registered: April 2011
Location: Wheeling, WV
Karma: -41
|
Senior Member |
|
|
Bummer. So there is likely no downside to opening the channel to accept the stuff I have.
Family issue came up last minute. Another bummer.
Dolph Santorine
DE N8JPC
Wheeling, West Virginia
1977 ex-Palm Beach TZE167V100820
1-ton, Sullybuilt Bags, Reaction Arms, 3.70 LSD, Manny Transmission, EV-6010,
> On May 9, 2016, at 8:40 PM, Ken Henderson wrote:
>
> On Mon, May 9, 2016 at 7:58 PM, Dolph Santorine
> wrote:
>
>> What’s a good source for the vinyl trim around the windows?
> Your very own 3D printer.
>
> Otherwise, there ain't one. :-) :-(
>
> Missed you at BS!
>
> Ken H.
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
|
|
| Re: [GMCnet] Interior Vinyl Trim around Windows [message #300394 is a reply to message #300373] |
Mon, 09 May 2016 22:04 |
Dennis S
Messages: 3046
Registered: November 2005
Karma: 2
|
Senior Member |
|
|
Dolph
Are you talking about the flexible trim -- TRIM LOK is one trade name. You can buy various profiles online including eBay. Jim B uses it at the Coop so I would think he sells it as well.
If you mean the early style rigid plastic JimK has replacements.
Dennis
Dolph Santorine wrote on Mon, 09 May 2016 18:58What's a good source for the vinyl trim around the windows?
The parts coach came with a box of stuff that seems about right, but the tine that goes into the aluminum channel is too wide.
Thanks!
Dolph
DE N8JPC
Wheeling, West Virginia
1977 26' ex-PalmBeach
1-Ton, Sullybilt Bags, Reaction Arms, 3.70 LSD, Manny Transmission, EV-6010
"The Aluminum and Fiberglass Mistress"
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Dennis S
73 Painted Desert 230
Memphis TN Metro
|
|
|
|
|
|
| Re: [GMCnet] Interior Vinyl Trim around Windows [message #300407 is a reply to message #300403] |
Tue, 10 May 2016 07:03 |
Dolph Santorine
Messages: 1236
Registered: April 2011
Location: Wheeling, WV
Karma: -41
|
Senior Member |
|
|
Correct, Emery - I’m after the vinyl.
I’m good with all the hard plastic parts between the coach and the parts coach, although some PO painted the plastic parts with a paint that crinkles when you apply a more modern painting system, so prep is a little bit of a pain.
I’m using SEM - good colors, and I’ve had great luck with adhesion.
Dolph
> On May 10, 2016, at 3:33 AM, Emery Stora wrote:
>
> Dolph probably has the flexible vinyl that snaps into a groove around the window not the hard plastic pieces. Is this correct, Dolph?
>
> Emery Stora
>
>> On May 9, 2016, at 8:21 PM, A. wrote:
>>
>> Dolph Santorine wrote on Mon, 09 May 2016 20:41
>>> Bummer. So there is likely no downside to opening the channel to accept the stuff I have.
>>>> > What's a good source for the vinyl trim around the windows?
>>>> Your very own 3D printer....
>> Terry Taylor is pretty good with trim stuff on his 3d printer. He made replacement bunk hanger covers: http://imgur.com/a/h475k
>> --
>> '73 23' Sequoia For Sale
>> '73 23' CanyonLands Parts Unit For Sale
>> Upper Alabama
>> Why don't they sell spray paint that washes off with soap and water for graffiti vandals to use?
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|
|
| Re: [GMCnet] Interior Vinyl Trim around Windows [message #300424 is a reply to message #300407] |
Tue, 10 May 2016 13:49 |
jimk
Messages: 6734
Registered: July 2006
Location: Belmont, CA
Karma: 9
|
Senior Member |
|
|
We have new flexable trim that we supply on later models,
I can have Gary or Nick send you a short strip for you to compare.
On our AIR FILTER side we use the Trim Lock, but they o not have nearly the
type your looking for.
On Tue, May 10, 2016 at 5:03 AM, Dolph Santorine
wrote:
> Correct, Emery - I’m after the vinyl.
>
> I’m good with all the hard plastic parts between the coach and the parts
> coach, although some PO painted the plastic parts with a paint that
> crinkles when you apply a more modern painting system, so prep is a little
> bit of a pain.
>
> I’m using SEM - good colors, and I’ve had great luck with adhesion.
>
> Dolph
>
>
>
>
>> On May 10, 2016, at 3:33 AM, Emery Stora wrote:
>>
>> Dolph probably has the flexible vinyl that snaps into a groove around
> the window not the hard plastic pieces. Is this correct, Dolph?
>>
>> Emery Stora
>>
>>> On May 9, 2016, at 8:21 PM, A. wrote:
>>>
>>> Dolph Santorine wrote on Mon, 09 May 2016 20:41
>>>> Bummer. So there is likely no downside to opening the channel to
> accept the stuff I have.
>>>> >> What's a good source for the vinyl trim around the windows?
>>>> > Your very own 3D printer....
>>> Terry Taylor is pretty good with trim stuff on his 3d printer. He made
> replacement bunk hanger covers: http://imgur.com/a/h475k
>>> --
>>> '73 23' Sequoia For Sale
>>> '73 23' CanyonLands Parts Unit For Sale
>>> Upper Alabama
>>> Why don't they sell spray paint that washes off with soap and water for
> graffiti vandals to use?
>>>
>>> _______________________________________________
>>> GMCnet mailing list
>>> Unsubscribe or Change List Options:
>>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>>
>> _______________________________________________
>> GMCnet mailing list
>> Unsubscribe or Change List Options:
>> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>
--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502
|
|
|
|
Goto Forum:
Current Time: Mon Nov 18 00:40:55 CST 2024
Total time taken to generate the page: 0.01147 seconds
|
GMCforum
Search
Help
Register
Login
Home
