[GMCnet] Huber torsion Bars! [message #299204] |
Sun, 17 April 2016 19:52 |
p.huber
Messages: 73 Registered: June 2012 Location: Oakland
Karma: 3
|
Member |
|
|
If there is still an interest in the Huber torsion Bar with 1" extension of
the hex to go into the lower Control Arm please let me know. The old torsion
bars are slowly wearing out after 40 or more years. I supplied more than 75
sets of this new torsion bars and everybody seems to be very happy with
them! I have some committed interests already but need at least 15 sets (to
get a good price) of orders committed. I could put a batch together and it
will cost approximately $ 850.00 delivered to you place. It will take
approximately 2 month to do the transaction.
So if you are interested in the new torsion bars please contact me directly
and make your firm commitment with your deposit. Contact me at:
a1huber@prodigy.net. Thank you.
Best regard
Peter D. Huber
8190 Surrey Lane, Oakland, CA 94605
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
|
|
|