GMCforum: GMCnet » SF Bay area machine shops?

Home » Public Forums » GMCnet » SF Bay area machine shops?

Show: Today's Messages :: Polls :: Message Navigator

SF Bay area machine shops? [message #298699]

Tue, 05 April 2016 17:57

Messages: 1262
Registered: September 2009

Karma:

Senior Member

hi, we're doing an engine rebuild and found that all the heads
we have can't be used as-is, so we're basically stuck.

Can anybody recommend a shop that can grind the seats correctly
and do the valves on 455 heads? Seems like good machine shops are
getting hard to find around here. This is in the San Jose, CA area.

thanks,
Karen
1975 26'

Report message to a moderator

[Message index]

		SF Bay area machine shops? By: KB on Tue, 05 April 2016 17:57
		Re: SF Bay area machine shops? By: bwevers on Tue, 05 April 2016 18:18
		Re: SF Bay area machine shops? By: KB on Thu, 07 April 2016 09:30
		Re: SF Bay area machine shops? By: Larry on Tue, 05 April 2016 19:34
		Re: SF Bay area machine shops? By: KB on Tue, 05 April 2016 20:14

Previous Topic:	Any experience with E3 Spark plugs
Next Topic:	Mr. Onan Fuel Pump Mostly Working, But...

Goto Forum:

-=] Back to Top [=-

Current Time: Mon Sep 30 05:19:49 CDT 2024

Total time taken to generate the page: 0.00755 seconds