GMCforum: GMCnet » Carburetor Heat pipe: how is it attached

Home » Public Forums » GMCnet » Carburetor Heat pipe: how is it attached

Show: Today's Messages :: Polls :: Message Navigator

Carburetor Heat pipe: how is it attached [message #297680]

Sat, 19 March 2016 20:39

Broham

Messages: 204
Registered: March 2013
Location: Detroit, Michigan

Karma: 0

Senior Member

hello all,

I have another question. Smile

How is the carburetor heater pipe connected to the manifold? I see it is connected to the carb with a compression fitting/nut but on mine, it doesn't seem to have any connection to the manifold. Does it just connection with a friction fit? Is it rusted out and that's why it is not connected?

Can I just re attach it with JB weld?

Here are some pics.

thanks

Todd

http://www.gmcmhphotos.com/photos/member-galleries/p60270-carb-heater.html

http://www.gmcmhphotos.com/photos/member-galleries/p60272-carb-heater-2.html

Todd Owner of a 1976 Eleganza II 26’ other toys: 93 Vette 84 Goldwing and gone but not forgotten 72 CB750 Chopper 96 Caprice Classic 34 Ford roadster 94 Fleetwood

Report message to a moderator

Re: Carburetor Heat pipe: how is it attached [message #297683 is a reply to message #297680]

Sat, 19 March 2016 21:07

Dennis S

Messages: 3046
Registered: November 2005

Karma: 2

Senior Member

Todd

The choke heat tubes are a press fit.
See here -- in place --

http://www.gmcmhphotos.com/photos/carb-choke-and-secondary-horns/p16309.html

And here -- removed --

http://www.gmcmhphotos.com/photos/carb-choke-and-secondary-horns/p16308.html

You can search choke tube on the photo site for other info including replacements.

Dennis

Broham wrote on Sat, 19 March 2016 20:39

hello all,

I have another question.

How is the carburetor heater pipe connected to the manifold? I see it is connected to the carb with a compression fitting/nut but on mine, it doesn't seem to have any connection to the manifold. Does it just connection with a friction fit? Is it rusted out and that's why it is not connected?

Can I just re attach it with JB weld?

Here are some pics.

thanks

Todd

http://www.gmcmhphotos.com/photos/member-galleries/p60270-carb-heater.html

http://www.gmcmhphotos.com/photos/member-galleries/p60272-carb-heater-2.html

Dennis S
73 Painted Desert 230
Memphis TN Metro

[Updated on: Sat, 19 March 2016 21:46]

Report message to a moderator

Re: Carburetor Heat pipe: how is it attached [message #297684 is a reply to message #297680]

Sat, 19 March 2016 21:07

Ken Burton

Messages: 10030
Registered: January 2004
Location: Hebron, Indiana

Karma: 10

Senior Member

I believe it is just press fit into the hole.

Ken Burton - N9KB
76 Palm Beach
Hebron, Indiana

Report message to a moderator

Re: Carburetor Heat pipe: how is it attached [message #297686 is a reply to message #297680]

Sat, 19 March 2016 21:18

A Hamilto

Messages: 4508
Registered: April 2011

Karma: 39

Senior Member

Broham wrote on Sat, 19 March 2016 20:39

hello all,
I have another question.

How is the carburetor heater pipe connected to the manifold? I see it is connected to the carb with a compression fitting/nut but on mine, it doesn't seem to have any connection to the manifold. Does it just connection with a friction fit? Is it rusted out and that's why it is not connected?

Can I just re attach it with JB weld?

Here are some pics.

thanks

Todd

Are any of these parts from Jim K what you need?:

http://www.appliedgmc.com/prod.itml/icOid/803
http://www.appliedgmc.com/prod.itml/icOid/804
http://www.appliedgmc.com/prod.itml/icOid/805

Report message to a moderator

Re: [GMCnet] Carburetor Heat pipe: how is it attached [message #297687 is a reply to message #297684]

Sat, 19 March 2016 22:17

jimk

Messages: 6734
Registered: July 2006
Location: Belmont, CA

Karma: 9

Senior Member

No, epoxy will burn from the heat.
Go to our sight and see what you need and see that the ends are reduced
down to slide in and the other end is secured so it will not pull out.

On Sat, Mar 19, 2016 at 7:07 PM, Ken Burton wrote:

> I believe it is just press fit into the hole.
> --
> Ken Burton - N9KB
> 76 Palm Beach
> Hebron, Indiana
>
> _______________________________________________
> GMCnet mailing list
> Unsubscribe or Change List Options:
> http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org
>

--
Jim Kanomata
Applied/GMC, Fremont,CA
jimk@appliedairfilters.com
http://www.appliedgmc.com
1-800-752-7502
_______________________________________________
GMCnet mailing list
Unsubscribe or Change List Options:
http://list.gmcnet.org/mailman/listinfo/gmclist_list.gmcnet.org

Jim Kanomata
Applied/GMC
jimk@appliedairfilters.com
www.appliedgmc.com
1-800-752-7502

Report message to a moderator

Previous Topic:	Sienna leather seats $145/pair
Next Topic:	(Future of the GMC related) Rob, Smithsonian is 3D scanning iconic Apollo 11

Goto Forum:

-=] Back to Top [=-

Current Time: Fri Nov 15 20:45:03 CST 2024

Total time taken to generate the page: 0.01934 seconds