GMCforum
For enthusiast of the Classic GMC Motorhome built from 1973 to 1978. A web-based mirror of the GMCnet mailing list.

Home » Public Forums » GMCnet » Oil filter bypass plug
Oil filter bypass plug [message #297142] Fri, 11 March 2016 12:58 Go to previous message
dr.diesel is currently offline  dr.diesel   United States
Messages: 85
Registered: April 2015
Location: The Haute, Indiana
Karma:
Member
Not being a fan of the filter bypass, this is how I plugged mine with a 1/4" pipe plug.

There wasn't enough room to run the tap down far enough, so I cut some grooves in a brass extension to finish the job.

I was surprised to find the adapter to block gasket was embossed metal? Any reason not to carefully cut one from a sheet of make-a-gasket material?

http://streamlinemechatronics.com/picts/oiladaptor1.jpg

http://streamlinemechatronics.com/picts/bottomingtap.jpg


77 Kingsley
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [GMCnet] Rear main seal
Next Topic: Converter Charger
Goto Forum:
  


Current Time: Fri Oct 18 17:15:32 CDT 2024

Total time taken to generate the page: 0.01180 seconds