Painting the cabinets... [message #296654] |
Thu, 03 March 2016 19:38 |
quadracerx1
Messages: 207 Registered: April 2013 Location: Puyallup, Washington
Karma: 1
|
Senior Member |
|
|
So I began working on the coach again!! FINALLY! After a lengthy hip replacement, I now am painting my cabinets... Should I scuff them and apply Krylon Fusion Paint directly or primer first?
Can I use a electric sander or is hand sanding better?
Thanks,
Steve
75 26' GMC Glenbrook
Puyallup, Washington
|
|
|
Re: Painting the cabinets... [message #296660 is a reply to message #296654] |
Thu, 03 March 2016 20:15 |
77Royale
Messages: 461 Registered: June 2014 Location: Mid Michigan
Karma: 6
|
Senior Member |
|
|
I'd scuff them with 220 grit on a random orbit sander. Then prime and paint. Prime in a different light color so you can see and be sure the krylon is covering it all. Hopefully goes without saying but you don't want to spray those inside the coach or near open flames.
77 Royale, Rear Dry Bath. 403, 3.55 Final Drive, Lenzi goodies, Patterson carb and dizzy.
Mid Michigan
|
|
|
Re: Painting the cabinets... [message #296664 is a reply to message #296654] |
Thu, 03 March 2016 20:39 |
quadracerx1
Messages: 207 Registered: April 2013 Location: Puyallup, Washington
Karma: 1
|
Senior Member |
|
|
Ok so I should prime first... Should I use Kilz Original Primer?
These are laminate cabinets...
Thanks,
Steve
75 26' GMC Glenbrook
Puyallup, Washington
|
|
|
|